Arama Sonuçları..

Toplam 154 kayıt bulundu.
GAC Molar Distallization Coils

GAC Molar Distallization Coils

Maxillary molars can be moved distally in 4-7 months without patient cooperation using our 100 gram Stop Wound Open Coil Springs. A modified Nance or A.C.C.O. may be used as an anchorage device initially. The coils are placed between the 1st bicuspid and the 1st molar – by passing the 2nd bicuspid. The coils are then activated against the molar using an archwire lock or our special crimpable stop. Cut the Stop Wound Open Coils so that they extend to the end of the buccal tube. Ligate the archwire to the 1st bicuspid, set the stop, then slide the coil onto the archwire. Next, feed the archwire into the tube, ensuring that the archwire is fully inserted with 2mm of wire extending beyond the tube. Uprighting springs may be used from the 1st bicuspid to the distal of the laterals to control any anterior movement. Using this system, you will see 1mm per month in space gained, with any anchorage loss well within clinically acceptable limits.

http://www.eksenmedikal.com.tr/gac-molar-distallization-coils

GAC Sentalloy® Closed Coil Springs

GAC Sentalloy® Closed Coil Springs

Closing spaces with closed Sentalloy coil springs brings exceptional results.   TWO DESIGNS ARE AVAILABLE: Two Eyelet Design: The initial length is 3mm unactivated (this does not include the eyelet lengths). These can be activated to 15mm without any deformation or change in force. No change in force will be seen as the coil contracts, reducing the space. To engage, slide over a molar hook and slowly stretch to the post on the cuspid bracket or a sliding hook on the archwire. Use a locking Mathieu plier on the widened platform of the eyelet. If you do not use the cuspid post, tie the archwire to the tooth you wish to move, slide on the sliding hook, then tie in the balance of the wire. Now engage the spring as above. For an eyelet with ligature wire, you have the option of hooking the eyelet on the molar, then activating the spring and tying it to the cuspid bracket with the .008” ligature wire. Should you wish to span an area greater than 15mm, measure the span first. Then place the coil on the molar hook and activate the coil 10mm. Tie the ligature wire to the bracket. 

http://www.eksenmedikal.com.tr/gac-sentalloy-closed-coil-springs

GAC Anterior Retracting Springs

GAC Anterior Retracting Springs

Anterior Retracting Springs are available for segmented retraction of the maxillary four incisors. The increased force in these springs was designed to overcome the resistance of the roots and the rectangular archwire. Stops may be set on the archwire to ensure the proper destination. The eyelets are engaged from our crimped hook or an archwire lock to the molar hook. Expect 1mm of movement per month of activation.

http://www.eksenmedikal.com.tr/gac-anterior-retracting-springs

GAC Kobayashi Pre-formed

GAC Kobayashi Pre-formed

Time Saving Hooks No need to remove archwire Made from pliable stainless steel

http://www.eksenmedikal.com.tr/gac-kobayashi-pre-formed

 
3WTURK CMS v6.03WTURK CMS v6.0