678-113 Slim Flush Cut Distal End Cutter

SLIM FLUSH CUT AND HOLD DISTAL END CUTTER

NK-101 FJ BIRD BEAK

A versatile instrument that bends and cuts all arch wires up to .022" x .025" (0.56 mm x 0.64 mm). A cutter is present at the base of the beaks.

Distal End Cutter

678-101 Distal End Cutter

UNIVERSAL CUT AND HOLD DISTAL END CUTTER

E-529 Heavy Duty Cutter TC

    This instrument cuts up to 1.5 mm wire with ease due to its triple action design. Minimum Cutting Capacity: 0.36 mm Maximum Cutting Capacity: Wire up to 1.5 mm.

Wire Cutter

678-104 Hard Wire Cutter

STRAIGHT HARD WIRE CUTTER

E-525 Hard Wire Cutter

15° Hard Wire TC  

Pin&Ligature Cutter

678-109 Mini Ligature Cutter

15˚ MICRO-MINI LIGATURE CUTTER

E-521 Micro-Mini Pin and Ligature Cutter TC

678-110 Ligature Cutter

Ligature cutter with reduced tip dimension. Designed to cut soft wire pins and ligature wires up to .012" (.30 mm). Closed

E-522 Pin and Ligature Cutter TC, Straight

NK-217 Ligature Cutter

  Provided with 7°cutting angle for easy access.  

OPAL Micro Stops

Limiting tooth movement or providing anchorage, Micro Stops slide along the arch wire to the desired position and are crimped with a Weingart, cutter, or crimping instrument. The small size of Micro Stops benefits the patient because of their comfort and esthetics. Available in two sizes, which are selected based on the size of the arch wire. Small Micro Stops fit arch wires up to .018ʺ round or .016ʺ x .016ʺ. Large Micro Stops fit arch wires larger than .018ʺ round or .016ʺ x .016ʺ.

NK-212 DİSTAL END CUTTER

It shear cuts hard and braided wire and then, holds the ends of the wire safely, so that it does not enter the soft tissue. The cutting edges are diamond honed.

GAC Stop Wound Open Coil Spring

Sentalloy Stop Wound Open Coil Springs are packaged individually or in three 7” lengths to a tube. Each length is quadruple wound every 4mm. After determining the length of coil needed, simply cut the wire at the center of the tight spiral as indicated below: The quadruple wind can be cut by having one person stretch the wind while another person makes the cut; or by using a separating plier to stretch the wind and a hard wire cutter to make the cut. Sentalloy Stop Wound Open Coils with a standard lumen of .035” are available in forces of 50, 100, 150 and 200 grams. (.045” compatible coils are available in 150 grams of force only.)