G4™ Nickel Titanium - Trueform™ I - Platinum Proportion®

  Trueform™ I @ 92% & 84% Roth / MBT* Square / Tru-Arch** CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.

G4™ Nickel Titanium - Trueform™ I - Platinum Proportion®

  Trueform™ I @ 92% & 84% Roth / MBT* Square / Tru-Arch** CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.

G4™ Nickel Titanium - Tooth Colored - Europa™ Form I

Europa™ Form I MBT* Ovoid CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G4™ Nickel Titanium - Bioform II

  Bioform II G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G&H PowerLinx™ Polymer Chain

  A new biomaterial breakthrough in elastic chain!   Our PowerLinx™ chain is manufactured from a thermoset polymer material which is superior to the traditional polyurethane or plastic chain. Has a more "rubber-like" consistency which provides advanced elasticity and rebound.   Studies prove the recovery force of PowerLinx™ chain remains elevated and active over a longer time-frame.   Engagement Time PowerLinx™ Plastic/Polyurethane 24 hrs. 95% 70% 48 hrs. 91% 64% 6 weeks 85% 20%   Each spool contains 2 meters (6.56 ft.)

NEOSmile™ Tooth Positioner

The NEOsmile™ is a preformed tooth positioner that will idealize the patient's finishing occlusion upon debanding. The NEOsmile™ will maintain a Class I ideal relationship and provide some buffering against TMJ related irritations. Each NEOsmile™ incorporates molded airholes for unencumbered breathing. Like a custom tooth positioner, the NEOsmile™ is seated on the upper arch posterior on one side and stretched to the opposite side. Then the patient can gently clench to fully occlude into the appliance.TYPICAL INDICATED APPLICATIONSModerate space closure, band spaces, minor to moderate diastema closure, 3-4° torque, 5-8° rotation, and minor to moderate uprighting can be achieved where space is available.Generalized spacing may be corrected by staging sizes of the NEOsmile™. When generalized spacing is present and NEOsmile™ is fitted to the patient, it is typically recommended to use a size smaller than the patient's measured size. Patients with moderate generalized spacing may require the use of two concurrent NEOsmile™ positioners in incrementally smaller sizes to achieve ideal results.SELECTING THE PROPER SIZEDetermine the patient size for the NEOsmile™ by measuring the millimeter span from distal of upper cuspid to distal of opposite cuspid along the incisal edges.Sold individuallyKit of 10 (includes 1 of 10 select sizes)  

In-Ovation C - Esthetics without Compromise

The In-Ovation C self-ligating bracket is made from ceramic material that compares to the strength and performance of metal.  A highly esthetic self-ligating bracket made from a special ceramic material with a rhodium processed clip for enhanced esthetics. The natural color of In-Ovation C makes the bracket a perfect fit for patients concerned about esthetics, while delivering functionality comparable to metal brackets.   THE POWER OF INTERACTIVE™ CONTROL FROM START TO FINISH In-Ovation C provides you with the ability to start and effectively finish your treatment in one, simple system. Using the technique of your choice, In-Ovation C enables you to maintain the precise degree of control that you need for each phase of your patient’s treatment. In-Ovation C’s revolutionary Interactive™ technology means you can choose the degree of engagement between the bracket and wire. In-Ovation C can be passive for leveling and aligning, expressive where control is realized and free-sliding is maintained, or active for controlled, optimal finishing. The choice is yours – a benefit not found in “passive only” brackets. INTERACTIVE CONTROL Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment. Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque.   Practice Advantages In-Ovation C provides a great way to optimize your practice and expand treatment options. Studies consistently show that self-ligating brackets significantly lower frictional forces; offer faster, easier archwire changes; increase appointment intervals; and shorten patient treatment time. In-Ovation C is easy for doctors and staff to use. Designed for reliable performance, the bracket’s 100% mechanical lock base ensures reliable bonding, debonding and the ability to rebond. A specially designed interactive, Coballoy spring clip provides excellent    Patient Advantages Superb esthetics provide the confidence your patients will love Less chairtime during visits Longer intervals between appointments Excellent results Improved oral hygiene   The Art of Orthodontic Excellence Transluscent Ceramic Construction In-Ovation C brackets are manufactured from a high-tech ceramic that combines excellent translucency with strength and performance similar to that of steel. Reliable Mechanical Bonding In-Ovation C employs a proprietary process to form strong, undercut bonding nubs on the bottom of the bracket base. These provide excellent anchoring points for the adhesive, resulting in a bond that is 100% mechanical and debonds easily after treatment. Straight Wire Technology A true straight wire appliance is one in which all the brackets have been designed to guide teeth into their desired positions with a preformed wire. In-Ovation is a true straight wire appliance that features: Compound Contour Base Torque in the Base Programmed In-Out Control Level Slot Alignment True Twin Design Occlusal and gingival twin tie wings offer an optimal mesial, distal span for achieving superior rotation control. The elimination of the elastomeric ligatures increases your inter-bracket distance. Spring Clip The self-ligating clip extends fully through a vertical channel in the bracket body, enhancing the structural integrity of the clip. A unique rhodium treatment process provides a low-sheen surface for reduced visibility and enhanced aesthetics.   Easy Opening and Closing The clip opens easily when pressure is applied occlusally to the gingival sphere using the Engage-C.  This is the primary method for opening and closing the clip is the gingival sphere. If unable to access the gingival sphere you can also utilize the Opin notch on the facial surface of the clip applying gentle pressure occulsally with amini scaler. The clip can be closed with aninstrument or simple finger pressure  on the incisal curve.   Triple Chamfered Slot Walls Slot walls are beveled outward, facilitating wire engagement and reducing the chance of the archwire binding or crimping. Disto–Gingival Dimple A color-code on the disto-gingival tie wing provides immediate identification of the tooth for which the bracket is intended. A matching colored removable site gauge is also in the slot for position orientation. Smooth Swept Tie Wings Smooth, swept tie wings help to reduce occlusal interference while increasing patient comfort. Adequate undercuts allow easy anchoring for elastic chains or the fastening of color ties at the patient’s request.    

GAC Elation™ MB

The The Elation™ MB design is a durable, high-quality mechanical base. This innovative mechanical base has been thoroughly tested and proven reliably effective in both bonding and de-bonding procedures. In addition, this design improvement will eliminate the need for a plastic primer. Our newest insert flows around the wire, which is designed to lower friction, as the wire touches the insert only at four small points at the polymeric wall. Next, Elation™ MB’s steel translates the torque through the base without the usual distortion or give of plastic and other polymeric materials. Unlike inserts which only line the slot wall, Elation™ MB’s unique slot is placed within the body to strengthen the whole bracket, not just the slot. This placement also makes the steel insert harder to see, creating a more aesthetic appearance. Elation™ MB works effectively with our NeoBond® adhesive; however, you can expect the same level of effectiveness from any light cure or chemical cure DENTSPLY GAC adhesive. Elation™ MB can be utilized with any archwire. But for a total esthetic solution appliance, we recommend GAC High Aesthetic Wires.   Stregnth and Beauty Durable Design -Polymeric strength resists discoloration and erosion\ Color code ID for easy bracket identification Nearly invisible steel insert Tested and proven mechanical lock base

GAC Ideal First Molar Bands

Users of our Ideal Bands will enjoy an edge hardness that prevents edge crushing, as well as a crown height. They are made from seamless stainless steel and are stretched minimally during contouring to assure greater strength. The interiors of all bands are etched for roughness to increase bond strength. Sized 5-38 for first molars and 1-32 for second molars, these “softer” bands provide excellent fit and stability. They are anatomically contoured for left and right, and they are marked using our patented Electro Chemical Etch process for easy-to-read permanent identification, and the interiors are acid-etched for roughness to increase bond strength. This process provides permanent band identification that withstands sterilization and will not weaken the integrity of the band nor stain nor anneal, as laser identification can. Ideal First Molar Identification Key First Molar Example       Coding Information 5 U L         “5” indicates size, sizes are available from 5 through 38 “U” indicates upper, “L” indicates lower “L” indicates left, “R” indicates right

NeoSentalloy - Square or Rectangluar

Intermediate archwire with body heat activation and true superelasticity with near constant forces. Also available with IONGUARD. Neo-Sentalloy is part of the Sentalloy wire family sharing the same properties designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation - At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity - Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect - Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits. IONGUARD - IONGUARD is not a coating; it is a fundamental change in the wire’s surface. Without changing the wire’s dimensions, or altering any of the wire’s unique superelastic properties, the process produces sliding mechanics comparable to stainless steel, while sealing the occlusal surface to reduce nickel leaching and breakage.  

Stainless Steel Multi_Strand

Multi-Strand wires come in the greatest variety of stiness to meet a wide variety of applications. All GAC Multi-Strand wires are formed from 304-VAR stainless steel containing 3 to 8 strands. • WildCat® Wire – High-tempered 3 strand twisted wire • TriCat Wire – Three twisted round wires • Quad-Cat Wire – Pre-formed, 3 strand rectangular twisted wire • PentaCat Wire – Coaxial wire, spooled or pre-formed, 5 strands • HexaCat Wire – Six strand round, spooled coaxial wire • Multi Braid Arches – Eight-strand braided edgewise wire • WildCat Lingual Retainer Wire – Straight lengths, uniquely designed with a coarse finish

High Esthetic Archwires

According to a recent patient survey by the American Journal of Orthodontics and Dentofacial Orthopedics, ceramic appliances with clear or white wires are rated consistently higher over their metal counterparts in terms of esthetics. This is a di­erence patients are willing to pay several hundred dollars for.  Crafted by a unique rhodium process, our High Esthetic  archwires have a low-reflectivity surface for a soft, frosted appearance delivering the same outstanding properties and performance as their standard counterparts.

E-529 Heavy Duty Cutter TC

    This instrument cuts up to 1.5 mm wire with ease due to its triple action design. Minimum Cutting Capacity: 0.36 mm Maximum Cutting Capacity: Wire up to 1.5 mm.

NK-102 A Young Pliers

The tips of this plier feature three half round loop forming tips. Sturdy construction for easy gripping and bending of quad helixes, lingual arches and rectangular steel wires.

NK-203 Posterior Band Removing Plier, Long

Will remove band with maximum patient comfort. The steel tip is in the middle of the pad for easy band removal using simple pressure

Wire Cutter

Tying Pliers

Tension Gauge

Orthodontic Device

Lehim Teli

678-104 Hard Wire Cutter

STRAIGHT HARD WIRE CUTTER

678-202 Weingart Pliers Slim

SLIM WEINGART PLIERS

OPAL Kobayashi Stainless Steel Ligature Wires

Kobayashi Stainless Steel Ligature Wires

Saturn™ Molar Bands - Mandibular 1st & 2nd Molar

Saturn™ bands are Ormco** size compatible.Precision-shaped tooth anatomy for a tight, secure fit with excellent retention. Our distinct right and left anatomy is completely proportioned in all planes and for each band size.Stainless steel that exhibits properties of "hardness" for strength to avoid wall collapse when fitting, yet is malleable enough for "snap" fitting that requires little or no burnishing.Increased buccal height for greater flexibility in the placement and positioning of buccal tubes and lingual attachments.Permanently etched using an Electro Chemical Etching process for easy permanent identification. Interiors are micro-etched to provide a rough ended surface for increased bond strength.30 upper and lower sizes graduated in even, closely spaced increments for improved fit.**G&H® is in no way affiliated with Ormco Corporation

Colboloy™ Blue Nickel Cobalt - Bioform III

Bioform III MBT* Tapered / Ideal** CompatibleColboloy™ Blue Nickel Cobalt wire, like Elgiloy® wire, is a unique alloy that possesses beneficial performance characteristics. Forgiving by nature to fracture and stress, Colboloy™ Blue allows intricate bending and, if desired, may be heat treated after formation to increase tensile strength and resiliency dramatically (10 minutes at 900°).Excellent for use in archwires, it is also superb for use in removable and functional appliances. Colboloy™ is the preferred wire for many professional laboratory technicians as well as orthodontists practicing Ricketts® and Bioprogressive® techniques.Pack of 25Pack of 10 (Solo-Pack™ option)*MBT is a trademark of 3M Unitek **Ideal is a trademark of Dentsply GAC Intl.

Stainless Steel - Ball Post - Europa™ Form II

Europa™ Form II Damon* CompatibleOur exclusive XR1™ Ball Post archwires offer the comfort and retention of ball ends plus a bendable brass post.A G&H proprietary soldering technique ensures clean, strong and consistent joints. The 16x25 or 19x25 XR1™ stainless base wire is heat treated and stress relieved – increasing the resiliency of the wire to improve mechanics.To select proper size looped arch, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler. Posted Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*G&H is in no way affiliated with or endorsed by Ormco Corp. or Dr. Dwight Damon

Stainless Steel - T-Loop - Trueform™ I

Trueform™ I Roth / MBT* Square / Tru-Arch** CompatibleLooped archwires offer excellent versatility for a variety of applications including anterior intrusion, space closure, elastic engagement, anterior retraction, etc.Looped archwires are offered in a range of sizes to accommodate most patients upper and lower arches, locating the loops between the lateral and cuspid. Manipulate anterior and posterior segments by activating the loops independently or in unison.To select proper size looped arch, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler. Looped Archwire Kit of 100 wires size distribution MM Sizing 24 26 28 30 32 34 36 38 40 42 44 46 Quantity 5 10 10 10 5 5 10 10 10 10 10 5 Pack of 10*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of Ormco

Stainless Steel - Tooth Colored - Europa™ Form II

Europa™ Form II Damon* CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.By using only 304v medical grade stainless steel in conjunction with state-of-the-art wire forming equipment, we can ensure you a precise, high-quality stainless steel arch with consistent performance characteristics and integrity.With over 25 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.Pack of 25Pack of 10 (Solo-Pack™ option)*G&H is in no way affiliated with or endorsed by Ormco Corp. or Dr. Dwight Damon

Stainless Steel - Bioform II

Bioform II By using only 304v medical grade stainless steel in conjunction with state-of-the-art wire forming equipment, we can ensure you a precise, high-quality stainless steel arch with consistent performance characteristics and integrity.With over 25 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.

XR1™ Heat-Treated Stainless - Bioform III

Bioform III MBT* Tapered / Ideal** CompatibleOur XR1™ stainless steel is uniquely heat-treated and stress relieved - increasing the resiliency of the wire for improved mechanics.With over 35 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.We use state-of-the-art forming equipment which ensures product integrity, consistent performance characteristics, and precise archforms.

M5™ Copper Nickel Titanium - Bioform III

Bioform III MBT* Tapered / Ideal** CompatibleA premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Tooth Colored - Europa™ Form II

Europa™ Form II Damon* CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G4™ Nickel Titanium - Bioform III

Bioform III MBT* Tapered / Ideal** CompatibleG4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G&H Dyna-Link™ Elastomeric Chain, Black, Short, 15 ft spool

  15ft. Spool   3 spacing variations between links  33 colors available - .026" thicknessThe .018" thin version (Slim-Chain™) is easier to ligate under tie wings and self-ligating brackets, great for accommodating lingual treatment mechanics or if a thinner chain is needed to increase patient comfort.Chain colors match our Versa-Tie™ and Bambino-Tie™ Ligatures. Conveniently store up to 12 chain spools with our anodized aluminum chain dispenser   Continuous Short Long

CHEEK RETRACTOR SMALL- MEDIUM - LARGE AUTOCLAVABLE 2PK

Small - Medium, ClearAutoclavable to 250° FDo not Dry-Heat sterilizePackage of 2

MICROETCHER™ IIA

The MicroEtcher IIA is recognized as one of the most valuable tools for dentistry. The MicroEtcher provides precise surface micro-roughening, improving bond strength up to 400%. Surface area and surface reactivity is dramatically increased for maximum bond. Sandblasting is fast and easy with most surface roughening procedures requiring only a few seconds. It offers all stainless construction and replaceable carbide tip. Now with a permanently affixed jar lid and spill resistant abrasive filter.Features:– Etching all metals, composites & amalgam for maximum bond strength– Intraoral porcelain repair– Pit & fissure prep– Cleaning darked grooves to reveal decay– Prepping incipient lesions and minor Class I & V– Debriding bur preps for best esthetics & bonds

In-Ovation® mini - Small Imprint, Big Impact

The  In-Ovation® mini bracket is the smallest self-ligating twin bracket we’ve ever produced. Designed, developed and manufactured using the latest in micro-engineering technology, In-Ovation mini raises the bar on low-profile performance. From the innovative clip design to the patented Interactive™ technology that offers unmatched precision and control—In-Ovation® mini gives you the power to finish every case with the utmost precision. And with a smaller than other competitive interactive brackets your patients will love the esthetics and comfort level. Innovation means doing more with less, and no bracket does more for you, your practice, and your patients, than the In-Ovation mini. It’s the bracket you’ve always wanted, from the company you’ve always trusted. Programmed for Versatility In-Ovation® mini is proud to offer you the versatility of both interactive and passive design in a single unified system. It puts unprecedented treatment options in your hands. Passive cuspids and bicuspids are available in the posterior for lower friction sliding mechanics. INTERACTIVE CONTROL Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment.       Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed.     Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque.     Design Features Interactive Spring Clip Presents the utmost in control throughout treatment.   True Twin Design Four tie-wings with adequate undercuts and integrated body channel allow easy anchoring of elastic chains or use of color ties at the patient’s request. Base Design An 80 gauge single mesh, compound contoured base provides a precise anatomical fit. Exclusive Patented Standard Palmer Notation laser etched into the mesh facilitates bracket management with a ready reference of the quadrant, tooth and prescription. Full Slot Clip Coverage For rotational control that limits the need for auxiliaries. Facial Scribe Line Added to the In-Ovation mini for simplified placement. True Straight Wire Design A true straight wire appliance is one in which all the brackets have been designed to guide the teeth into their ideal position with a preformed wire. In-Ovation® mini is a true straight wire appliance that features a compound contour base, torque in the base, programmed in-out control and level slot alignment. Easy Open Clip Affords a frustration-free procedure. Disto-Gingival Dimple A color code on the disto-gingival tie-wing provides immediate identification of the tooth for which the bracket was designed. Triple Chamfered Slot Walls Ease of engagement, reducing the chance of the archwire binding or crimping. Smooth Swept Tie Wings Helps reduce occlusal interference while increasing patient comfort.

BioForce

BioForce - Square or Rectangluar   Optimally biological forces begin at approximately 80 grams of force at the anteriors, and gradually increase to approximately 300 grams of force in the molars. Also available with IONGUARD. Optimal Tooth Movement and Ideal Biological Forces As this chart shows, the optimal force needed to move anteriors is not the same as the optimal force needed to move molars. If a force is designed to move anteriors, it is too light to move molars. If a force is great enough to move molars, the force is too strong - traumatically strong - for anteriors. Other wires offer one force at a time, requiring at least two or three wire changes to achieve the desired movement. BioForce exhibits low forces at the anterior, gradually increases force in the bicuspids, and again in the molars. Each tooth receives the optimal biological force necessary to move specific teeth in one wire. Anterior Region of arch form has the lowest heat-activated force, as anterior teeth have the lightest roots. The Bicuspid Region of the arch maintains a slightly greater heat-activated force to move larger rooted bicuspids. The Posterior Region of the arch form has the greatest heat-activated force within the archwire for moving thestrong-rooted molars. BioForce also shares the properties of all Sentalloy wires and is designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits. IONGUARD - IONGUARD is not a coating; it is a fundamental change in the wire’s surface. Without changing the wire’s dimensions, or altering any of the wire’s unique superelastic properties, the process produces sliding mechanics comparable to stainless steel, while sealing the occlusal surface to reduce nickel leaching and breakage.

Double Key Hole Loop - Retraction Wire

DENTSPLY GAC's Double Keyhole Loop stainless steel archwires are used to gently close spaces with the ideal sti­ness to maintain arch form. This wire is available in two millimeter increments from 22mm to 44mm, with two or four keyhole loops, as well as a kit containing 75 assorted sizes.

Coballoy Wire

Coballoy is an inexpensive, cobalt chromium alloy wire that is remarkably tough, yet it is more malleable than stainless steel. It can be heat treated for greater resiliency, or used without heat treatment. It can be welded or soldered and is ideal for wires that require complex bending

E-525 Hard Wire Cutter

15° Hard Wire TC  

NK-108 Nance Pliers

With 4 step tip for forming various size loops in rectangular and round wires. For wires up to .028” (0.71 mm).

NK-207 Direct Bond Removing Plier, Straight

Ideal for removing ceramic and stainless steel brackets. The tips wedge between edge of bracket and tooth surface and remove it with ease. Completely lip safe.

Pin&Ligature Cutter

Bracket Tweezers

Handy Torch

*Designed for one-handed operation during soldering or waxing. *Used by hand or by placing it on a desk. *Flame control is possible .Flame is stable. *Gas is empty at the time of delivery.   *The head is given 70 degrees angle. This angle avoids the flame from going straight upwards, preventing direct dripping of wax on the noozzle. Specifications *Weight/ 245g (with screen board) *Gas volume/ 15g *Combustion time/ Approx. 35 minutes: Labo/ Approx. 80 minutes: Ortho *Flame temperature/ 1300°C (blue flame) *Non-Autoclavable

CAPlant & SMS

Diversity - Optimized in mid-palate- Diverse functions in the buccal- 3-way slot for various wiring- 3-D teeth movement and multi-anchor effect with a single mini-implantSimplicity & Stability- Easy insertion and removal of wires- Rigid wire-anchor fastening by cap and tapered slot fixture headHygiene & Comfort- NO-RESIN fastening- Minimizes contamination and foreign body sensation   SMS High force loadingEasy wire engaging and elastomerSliding mechanics applicable         

Articulators

678-109 Mini Ligature Cutter

15˚ MICRO-MINI LIGATURE CUTTER

678-203 How Pliers STRAIGHT

STRAIGHT HOW PLIERS