Arama Sonuçları

G&H SPRING, MOLAR DIST. 21" SPOOL

Molar Distalizing Open Coil Springs deliver gentle 100 grams of force to achieve average 1mm to 1.5mm distalization per month without patient cooperation. Place over archwire and anchor with stop hook and elastics or Nance Appliance for maximum effectiveness. Intermittent closed coil sections allow for end stops when cut to length. .045" I.D.

http://www.eksenmedikal.com.tr/g-h-spring-molar-dist-21-spool

G&H Palatal Arch Bars

Our palatal arch bars are formed in .036" stainless with double back bends for arch maintenance, molar rotation and distalization.Pack of 5Pack of 50 Kits5 of each for sizes 34 MM, 36 MM, 38 MM, 40 MM, 46 MM, & 52 MM. 10 of each for sizes 42 MM & 44 MM.

http://www.eksenmedikal.com.tr/g-h-palatal-arch-bars

G&H QUAD-HELIX STRAIGHT

Combining the efficiency of the Quad-Helix appliance with the advantage of easy removal and insertion, allows greater flexibility and control during treatment.To be used with straight retention sheaths.Sold individually.

http://www.eksenmedikal.com.tr/g-h-quad-helix-straight

G&H BOND-A-BRAID™ LINGUAL RETAINER 10PK

Permanent retention is greatly enhanced using a flattened, dead soft 8-braided wire. Intra-arch splinting with this thin ribbon arch prevents torque control problems that can occur using a round braided wire for these procedures.When bonded on the lingual of the upper incisors, a very thin rectangular wire can be adapted with little lower incisor interference.The dead soft wire is easy to adapt and prevents inadvertent tooth movement associated with active force wires.Bond-A-Braid is excellent for semi-permanent orthodontic splinting of the upper or lower incisors. It can be used to hold diastemas closed, maintain difficult extraction sites and solving various other tooth-splinting dilemmas.Excellent for splinting periodontally comprised teeth.(10) 6" lengths

http://www.eksenmedikal.com.tr/bond-a-braid-lingual-retainer-10pk

G&H 14K GOLD EXTRUSION HK W/CHAIN

Mesh base assures reliable bonding while a low profile limits irritation. 14k Gold and titanium nitride coated hook and chain reduces possibility of allergic reactions.Chain is 1 inch in length with approximately 20 small links. Inner diameter of the chain links are .022".Sold Individually.

http://www.eksenmedikal.com.tr/14k-gold-extrusion-hk-wchain

GAC Stop Wound Open Coil Spring

Sentalloy Stop Wound Open Coil Springs are packaged individually or in three 7” lengths to a tube. Each length is quadruple wound every 4mm. After determining the length of coil needed, simply cut the wire at the center of the tight spiral as indicated below: The quadruple wind can be cut by having one person stretch the wind while another person makes the cut; or by using a separating plier to stretch the wind and a hard wire cutter to make the cut. Sentalloy Stop Wound Open Coils with a standard lumen of .035” are available in forces of 50, 100, 150 and 200 grams. (.045” compatible coils are available in 150 grams of force only.)

http://www.eksenmedikal.com.tr/stop-wound-open-coil-spring

GAC Molar Distallization Coils

Maxillary molars can be moved distally in 4-7 months without patient cooperation using our 100 gram Stop Wound Open Coil Springs. A modified Nance or A.C.C.O. may be used as an anchorage device initially. The coils are placed between the 1st bicuspid and the 1st molar – by passing the 2nd bicuspid. The coils are then activated against the molar using an archwire lock or our special crimpable stop. Cut the Stop Wound Open Coils so that they extend to the end of the buccal tube. Ligate the archwire to the 1st bicuspid, set the stop, then slide the coil onto the archwire. Next, feed the archwire into the tube, ensuring that the archwire is fully inserted with 2mm of wire extending beyond the tube. Uprighting springs may be used from the 1st bicuspid to the distal of the laterals to control any anterior movement. Using this system, you will see 1mm per month in space gained, with any anchorage loss well within clinically acceptable limits.

http://www.eksenmedikal.com.tr/gac-molar-distallization-coils

GAC Sentalloy® Closed Coil Springs

Closing spaces with closed Sentalloy coil springs brings exceptional results. TWO DESIGNS ARE AVAILABLE: Two Eyelet Design: The initial length is 3mm unactivated (this does not include the eyelet lengths). These can be activated to 15mm without any deformation or change in force. No change in force will be seen as the coil contracts, reducing the space. To engage, slide over a molar hook and slowly stretch to the post on the cuspid bracket or a sliding hook on the archwire. Use a locking Mathieu plier on the widened platform of the eyelet. If you do not use the cuspid post, tie the archwire to the tooth you wish to move, slide on the sliding hook, then tie in the balance of the wire. Now engage the spring as above. For an eyelet with ligature wire, you have the option of hooking the eyelet on the molar, then activating the spring and tying it to the cuspid bracket with the .008” ligature wire. Should you wish to span an area greater than 15mm, measure the span first. Then place the coil on the molar hook and activate the coil 10mm. Tie the ligature wire to the bracket.

http://www.eksenmedikal.com.tr/gac-sentalloy-closed-coil-springs

GAC Pre-formed Ligature Wire

For quick tightening of ligatures with Twist-Mate

http://www.eksenmedikal.com.tr/gac-pre-formed-ligature-wire