Arama Sonuçları

OPAL Nickel Titanium Closed-Coil Springs

Nickel Titanium Closed-Coil Springs

http://www.eksenmedikal.com.tr/nickel-titanium-closed-coil-springs

G&H BONDABLE COIL <b class=red>EYELET</b>

G&H BONDABLE COIL EYELET

Round base with .036" inside diameter opening.

http://www.eksenmedikal.com.tr/g-h-bondable-coil-eyelet

The eyelet bracket is composed of a popular high strength techno-polymer material. It features a funnel entry system for easy wire introduction and a low profile shape which provides optimal patient comfort. Often used in place of regular brackets for crowded areas.Opening will accommodate wires up to .021x.025". Package of 5

http://www.eksenmedikal.com.tr/g-h-composite-eyelets

G&H G4™ Nickel Titanium Closed Coil TAD Springs

G4™ Nickel Titanium Closed Coil TAD Springs The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires. Step 1. Use the specially designed TAD Ruler to measure the distance between the screw head and the hook. (Fig. A) Step 2. Flip the ruler over to view recommended spring for the 200g force range or refer to the Force Chart and select any force level and size spring desired. Step 3. Match the spring size desired to the label on the box and engage spring (Fig. B). The TAD eyelet is shaped to allow quick and easy engagement without ligation to virtually all TAD Screws. The G&H® design slips over the screw head then snaps in place locking positively on the neck. Special OfferOrder 12 boxes or more of your choice of springs. Receive a box of measuring gauges, inventory kit box and a laminated force chart at no charge.(12 box minimum)

http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-closed-coil-tad-springs

G&H SS CLOSED COIL SPR, 010x030

G&H open and closed coil springs are available on 21" spools. No eyelets.

http://www.eksenmedikal.com.tr/g-h-ss-closed-coil-spr-010x030

G&H SS OPEN COIL SPR

G&H open and closed coil springs are available on 21" spools. No eyelets

http://www.eksenmedikal.com.tr/g-h-ss-open-coil-spr

GAC Sentalloy® Closed Coil Springs

Closing spaces with closed Sentalloy coil springs brings exceptional results. TWO DESIGNS ARE AVAILABLE: Two Eyelet Design: The initial length is 3mm unactivated (this does not include the eyelet lengths). These can be activated to 15mm without any deformation or change in force. No change in force will be seen as the coil contracts, reducing the space. To engage, slide over a molar hook and slowly stretch to the post on the cuspid bracket or a sliding hook on the archwire. Use a locking Mathieu plier on the widened platform of the eyelet. If you do not use the cuspid post, tie the archwire to the tooth you wish to move, slide on the sliding hook, then tie in the balance of the wire. Now engage the spring as above. For an eyelet with ligature wire, you have the option of hooking the eyelet on the molar, then activating the spring and tying it to the cuspid bracket with the .008” ligature wire. Should you wish to span an area greater than 15mm, measure the span first. Then place the coil on the molar hook and activate the coil 10mm. Tie the ligature wire to the bracket.

http://www.eksenmedikal.com.tr/gac-sentalloy-closed-coil-springs

GAC Anterior Retracting Springs

Anterior Retracting Springs are available for segmented retraction of the maxillary four incisors. The increased force in these springs was designed to overcome the resistance of the roots and the rectangular archwire. Stops may be set on the archwire to ensure the proper destination. The eyelets are engaged from our crimped hook or an archwire lock to the molar hook. Expect 1mm of movement per month of activation.

http://www.eksenmedikal.com.tr/gac-anterior-retracting-springs