678-113 Slim Flush Cut Distal End Cutter

SLIM FLUSH CUT AND HOLD DISTAL END CUTTER

678-502 Hammerhead NiTi Pliers SLIM

SLIM HAMMERHEAD® NITI PLIERS

SWIVEL HEAD BRACKET POSITIONER

This stainless steel positioning device features four bracket height measurements: 3.5, 4.0, 4.5, and 5.0. Adjustable for use on both anterior and posterior teeth.Hinged tip adjustable to 45°. Works with .022 and .018 bracket systems.Autoclavable up to 370°F/188°C

E-529 Heavy Duty Cutter TC

    This instrument cuts up to 1.5 mm wire with ease due to its triple action design. Minimum Cutting Capacity: 0.36 mm Maximum Cutting Capacity: Wire up to 1.5 mm.

E-525 Hard Wire Cutter

15° Hard Wire TC  

Handy Torch

*Designed for one-handed operation during soldering or waxing. *Used by hand or by placing it on a desk. *Flame control is possible .Flame is stable. *Gas is empty at the time of delivery.   *The head is given 70 degrees angle. This angle avoids the flame from going straight upwards, preventing direct dripping of wax on the noozzle. Specifications *Weight/ 245g (with screen board) *Gas volume/ 15g *Combustion time/ Approx. 35 minutes: Labo/ Approx. 80 minutes: Ortho *Flame temperature/ 1300°C (blue flame) *Non-Autoclavable

CAPlant & SMS

Diversity - Optimized in mid-palate- Diverse functions in the buccal- 3-way slot for various wiring- 3-D teeth movement and multi-anchor effect with a single mini-implantSimplicity & Stability- Easy insertion and removal of wires- Rigid wire-anchor fastening by cap and tapered slot fixture headHygiene & Comfort- NO-RESIN fastening- Minimizes contamination and foreign body sensation   SMS High force loadingEasy wire engaging and elastomerSliding mechanics applicable         

E-521 Micro-Mini Pin and Ligature Cutter TC

E-522 Pin and Ligature Cutter TC, Straight

ACR

Aesthetics Compact & Simple- Minimizes root and bone damage- Aesthetic satisfaction from small exposure in the oral cavity Comfort Safe & Accurate- Easy, safe and accurate insertion- Decreases contamination and foreign body sensation in the oral cavity with low/simple plateau head Reliability Slim but Strong- Slim body with high torsional resistance- Precisely machined- Sharp but strong drill-free end CAUTION 1.2 mm mini-implants are not recommended below the attached gingiva/mucosa junction.     ACR(H) / ACR(S) ACR(H) ACR(S)

G&H MINI BONDABLE BUTTON

The domed head allows for maximum patient comfort. Sold individually.

PROTRACTION FACE MASK

The adaptability of this Protraction Face Mask allows for directional force application by adjusting the elastics engagement bar to deliver protractive force in the desired plane. Fully adjustable forehead and chin rests allow for adaptation to most patient’s anatomical structure. The angle of traction is then determined by adjusting the elastics engagement bar to deliver horizontal, upward or downward forces as necessary.Includes Allen wrench and 3 sets of pads.

REVERSE PULL FACE MASK SMALL-LARGE

The stainless steel frame is softened by hypo-allergenic chin and forehead pads to minimize irritation and maximize patient acceptance. Bilateral and bi-longitudinal adjust-ability allow for patient customization.Each mask also includes: 1 forehead pad, 2 chin pad and replacement screws.

MICROBRUSH® REGULAR

Longer handles, improved bendability and thicker head for increased capacity for most any fluid to be delivered accurately and economically.

SG CHIN CUP

An ultra-comfortable and effective headcap plus chincup that attaches with Velcro®.5 headcaps & 5 chincups per package

HEADGEAR STORAGE CASES

Headgear Storage Cases with Velcro® closures conveniently store facebow and headgear to protect and organize. Perfect size for any configuration. Approximately 5.75" x 9.5" (15cm x 24cm)5 per package.

G&H G4™ Nickel Titanium Closed Coil TAD Springs

        G4™ Nickel Titanium Closed Coil TAD Springs   The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires.   Step 1. Use the specially designed TAD Ruler to measure the distance between the screw head and the hook. (Fig. A)   Step 2. Flip the ruler over to view recommended spring for the 200g force range or refer to the Force Chart and select any force level and size spring desired.   Step 3. Match the spring size desired to the label on the box and engage spring (Fig. B).   The TAD eyelet is shaped to allow quick and easy engagement without ligation to virtually all TAD Screws. The G&H® design slips over the screw head then snaps in place locking positively on the neck.   Special OfferOrder 12 boxes or more of your choice of springs. Receive a box of measuring gauges, inventory kit box and a laminated force chart at no charge.(12 box minimum)