Arama Sonuçları..
Toplam 19 kayıt bulundu.
Sentalloy Round
Used as an initial archwire, the superelastic NiTi wire provides near constant forces during the leveling and aligning stage of treatment. The Sentalloy wire family is designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits.
http://www.eksenmedikal.com.tr/sentalloy-round
OPAL Preformed Stainless Steel Ligature Wires
Preformed Stainless Steel Ligature Wires
http://www.eksenmedikal.com.tr/preformed-stainless-steel-ligature-wires
In-Ovation C - Esthetics without Compromise
The In-Ovation C self-ligating bracket is made from ceramic material that compares to the strength and performance of metal. A highly esthetic self-ligating bracket made from a special ceramic material with a rhodium processed clip for enhanced esthetics. The natural color of In-Ovation C makes the bracket a perfect fit for patients concerned about esthetics, while delivering functionality comparable to metal brackets. THE POWER OF INTERACTIVE™ CONTROL FROM START TO FINISH In-Ovation C provides you with the ability to start and effectively finish your treatment in one, simple system. Using the technique of your choice, In-Ovation C enables you to maintain the precise degree of control that you need for each phase of your patient’s treatment. In-Ovation C’s revolutionary Interactive™ technology means you can choose the degree of engagement between the bracket and wire. In-Ovation C can be passive for leveling and aligning, expressive where control is realized and free-sliding is maintained, or active for controlled, optimal finishing. The choice is yours – a benefit not found in “passive only” brackets. INTERACTIVE CONTROL Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment. Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque. Practice Advantages In-Ovation C provides a great way to optimize your practice and expand treatment options. Studies consistently show that self-ligating brackets significantly lower frictional forces; offer faster, easier archwire changes; increase appointment intervals; and shorten patient treatment time. In-Ovation C is easy for doctors and staff to use. Designed for reliable performance, the bracket’s 100% mechanical lock base ensures reliable bonding, debonding and the ability to rebond. A specially designed interactive, Coballoy spring clip provides excellent Patient Advantages Superb esthetics provide the confidence your patients will love Less chairtime during visits Longer intervals between appointments Excellent results Improved oral hygiene The Art of Orthodontic Excellence Transluscent Ceramic Construction In-Ovation C brackets are manufactured from a high-tech ceramic that combines excellent translucency with strength and performance similar to that of steel. Reliable Mechanical Bonding In-Ovation C employs a proprietary process to form strong, undercut bonding nubs on the bottom of the bracket base. These provide excellent anchoring points for the adhesive, resulting in a bond that is 100% mechanical and debonds easily after treatment. Straight Wire Technology A true straight wire appliance is one in which all the brackets have been designed to guide teeth into their desired positions with a preformed wire. In-Ovation is a true straight wire appliance that features: Compound Contour Base Torque in the Base Programmed In-Out Control Level Slot Alignment True Twin Design Occlusal and gingival twin tie wings offer an optimal mesial, distal span for achieving superior rotation control. The elimination of the elastomeric ligatures increases your inter-bracket distance. Spring Clip The self-ligating clip extends fully through a vertical channel in the bracket body, enhancing the structural integrity of the clip. A unique rhodium treatment process provides a low-sheen surface for reduced visibility and enhanced aesthetics. Easy Opening and Closing The clip opens easily when pressure is applied occlusally to the gingival sphere using the Engage-C. This is the primary method for opening and closing the clip is the gingival sphere. If unable to access the gingival sphere you can also utilize the Opin notch on the facial surface of the clip applying gentle pressure occulsally with amini scaler. The clip can be closed with aninstrument or simple finger pressure on the incisal curve. Triple Chamfered Slot Walls Slot walls are beveled outward, facilitating wire engagement and reducing the chance of the archwire binding or crimping. Disto–Gingival Dimple A color-code on the disto-gingival tie wing provides immediate identification of the tooth for which the bracket is intended. A matching colored removable site gauge is also in the slot for position orientation. Smooth Swept Tie Wings Smooth, swept tie wings help to reduce occlusal interference while increasing patient comfort. Adequate undercuts allow easy anchoring for elastic chains or the fastening of color ties at the patient’s request.
http://www.eksenmedikal.com.tr/in-ovation-c-esthetics-without-compromise
NeoSentalloy - Square or Rectangluar
Intermediate archwire with body heat activation and true superelasticity with near constant forces. Also available with IONGUARD. Neo-Sentalloy is part of the Sentalloy wire family sharing the same properties designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation - At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity - Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect - Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits. IONGUARD - IONGUARD is not a coating; it is a fundamental change in the wire’s surface. Without changing the wire’s dimensions, or altering any of the wire’s unique superelastic properties, the process produces sliding mechanics comparable to stainless steel, while sealing the occlusal surface to reduce nickel leaching and breakage.
http://www.eksenmedikal.com.tr/neosentalloy-square-or-rectangluar
High Esthetic Archwires
According to a recent patient survey by the American Journal of Orthodontics and Dentofacial Orthopedics, ceramic appliances with clear or white wires are rated consistently higher over their metal counterparts in terms of esthetics. This is a dierence patients are willing to pay several hundred dollars for. Crafted by a unique rhodium process, our High Esthetic archwires have a low-reflectivity surface for a soft, frosted appearance delivering the same outstanding properties and performance as their standard counterparts.
http://www.eksenmedikal.com.tr/high-esthetic-archwires
OPAL Kobayashi Stainless Steel Ligature Wires
Kobayashi Stainless Steel Ligature Wires
http://www.eksenmedikal.com.tr/kobayashi-stainless-steel-ligature-wires
Saturn™ Molar Bands - Mandibular 1st & 2nd Molar
Saturn™ bands are Ormco** size compatible.Precision-shaped tooth anatomy for a tight, secure fit with excellent retention. Our distinct right and left anatomy is completely proportioned in all planes and for each band size.Stainless steel that exhibits properties of "hardness" for strength to avoid wall collapse when fitting, yet is malleable enough for "snap" fitting that requires little or no burnishing.Increased buccal height for greater flexibility in the placement and positioning of buccal tubes and lingual attachments.Permanently etched using an Electro Chemical Etching process for easy permanent identification. Interiors are micro-etched to provide a rough ended surface for increased bond strength.30 upper and lower sizes graduated in even, closely spaced increments for improved fit.**G&H® is in no way affiliated with Ormco Corporation
http://www.eksenmedikal.com.tr/saturn-molar-bands-mandibular-1st-2nd-molar
In-Ovation® mini - Small Imprint, Big Impact
The In-Ovation® mini bracket is the smallest self-ligating twin bracket we’ve ever produced. Designed, developed and manufactured using the latest in micro-engineering technology, In-Ovation mini raises the bar on low-profile performance. From the innovative clip design to the patented Interactive™ technology that offers unmatched precision and control—In-Ovation® mini gives you the power to finish every case with the utmost precision. And with a smaller than other competitive interactive brackets your patients will love the esthetics and comfort level. Innovation means doing more with less, and no bracket does more for you, your practice, and your patients, than the In-Ovation mini. It’s the bracket you’ve always wanted, from the company you’ve always trusted. Programmed for Versatility In-Ovation® mini is proud to offer you the versatility of both interactive and passive design in a single unified system. It puts unprecedented treatment options in your hands. Passive cuspids and bicuspids are available in the posterior for lower friction sliding mechanics. INTERACTIVE CONTROL Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment. Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque. Design Features Interactive Spring Clip Presents the utmost in control throughout treatment. True Twin Design Four tie-wings with adequate undercuts and integrated body channel allow easy anchoring of elastic chains or use of color ties at the patient’s request. Base Design An 80 gauge single mesh, compound contoured base provides a precise anatomical fit. Exclusive Patented Standard Palmer Notation laser etched into the mesh facilitates bracket management with a ready reference of the quadrant, tooth and prescription. Full Slot Clip Coverage For rotational control that limits the need for auxiliaries. Facial Scribe Line Added to the In-Ovation mini for simplified placement. True Straight Wire Design A true straight wire appliance is one in which all the brackets have been designed to guide the teeth into their ideal position with a preformed wire. In-Ovation® mini is a true straight wire appliance that features a compound contour base, torque in the base, programmed in-out control and level slot alignment. Easy Open Clip Affords a frustration-free procedure. Disto-Gingival Dimple A color code on the disto-gingival tie-wing provides immediate identification of the tooth for which the bracket was designed. Triple Chamfered Slot Walls Ease of engagement, reducing the chance of the archwire binding or crimping. Smooth Swept Tie Wings Helps reduce occlusal interference while increasing patient comfort.
http://www.eksenmedikal.com.tr/in-ovation-mini-small-imprint-big-impact
BioForce
BioForce - Square or Rectangluar Optimally biological forces begin at approximately 80 grams of force at the anteriors, and gradually increase to approximately 300 grams of force in the molars. Also available with IONGUARD. Optimal Tooth Movement and Ideal Biological Forces As this chart shows, the optimal force needed to move anteriors is not the same as the optimal force needed to move molars. If a force is designed to move anteriors, it is too light to move molars. If a force is great enough to move molars, the force is too strong - traumatically strong - for anteriors. Other wires offer one force at a time, requiring at least two or three wire changes to achieve the desired movement. BioForce exhibits low forces at the anterior, gradually increases force in the bicuspids, and again in the molars. Each tooth receives the optimal biological force necessary to move specific teeth in one wire. Anterior Region of arch form has the lowest heat-activated force, as anterior teeth have the lightest roots. The Bicuspid Region of the arch maintains a slightly greater heat-activated force to move larger rooted bicuspids. The Posterior Region of the arch form has the greatest heat-activated force within the archwire for moving thestrong-rooted molars. BioForce also shares the properties of all Sentalloy wires and is designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits. IONGUARD - IONGUARD is not a coating; it is a fundamental change in the wire’s surface. Without changing the wire’s dimensions, or altering any of the wire’s unique superelastic properties, the process produces sliding mechanics comparable to stainless steel, while sealing the occlusal surface to reduce nickel leaching and breakage.
http://www.eksenmedikal.com.tr/bioforce-square-or-rectangluar
OPAL Spooled Ligature Wire
Spooled Ligature Wire
http://www.eksenmedikal.com.tr/spooled-ligature-wire
Saturn™ Molar Bands - Maxillary 1st & 2nd Molar
Saturn™ bands are Ormco** size compatible.Precision-shaped tooth anatomy for a tight, secure fit with excellent retention. Our distinct right and left anatomy is completely proportioned in all planes and for each band size.Stainless steel that exhibits properties of "hardness" for strength to avoid wall collapse when fitting, yet is malleable enough for "snap" fitting that requires little or no burnishing.Increased buccal height for greater flexibility in the placement and positioning of buccal tubes and lingual attachments.Permanently etched using an Electro Chemical Etching process for easy permanent identification. Interiors are micro-etched to provide a rough ended surface for increased bond strength.30 upper and lower sizes graduated in even, closely spaced increments for improved fit.**G&H® is in no way affiliated with Ormco Corporation
http://www.eksenmedikal.com.tr/saturn-molar-bands-maxillary-1st-2nd-molar
G&H Versa-Tie™ Elastomeric Ligature Ties
Latex-Free, Versa-Ties™ Ligatures will accommodate complete archwire engagement with a single stick. Also offers double-ended thumb tabs that have an etched finish providing gloved hands a secure grasp. For those patients that would like to have alternating colors, the technician is able to create half-sticks easily due to the scored center line. This reduces waste & avoids cross contamination.
http://www.eksenmedikal.com.tr/g-h-versa-tie-elastomeric-ligature-ties
In-Ovation® R - The Original
In-Ovation R has been recognized as an industry leader for over a decade. Thousands of clinicians worldwide have trusted In-Ovation to treat their patients. The precision and quality built into these brackets offers repeatable success, practice efficiencies and beautiful results every time. See how far In-Ovation R can take you, your patients and your practice. In-Ovation Means Interactive In-Ovation R provides you with the ability to start and effectively finish your treatment with one, simple system. Using the technique of your choice, In-Ovation R enables you to maintain the precise degree of control that you need for each phase of your patient’s treatment. In-Ovation R’s unique Interactive technology means you can choose the degree of engagement between the bracket and wire. It can be passive for leveling and aligning, expressive where control is realized and free-sliding is maintained, or active for controlled, optimal finishing. Passive Phase Expressive Phase Active Phase Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment. Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque. Practice Advantages Not all self-ligating brackets are created equal. In-Ovation R brackets were created to optimize the treatment process with precision engineering and true straight wire design. The In-Ovation orthodontic systems are the result of a keen understanding of human physiology and orthodontic engineering. The compound contoured base of the In-Ovation R bracket is designed to provide a precise anatomical fit across the enamel surface of the tooth. The smooth swept tie-wings are engineered to minimize occlusal interference in order to increase patient comfort. In addition, the chamfered archwire slot is designed to reduce chair time by facilitating wire engagement and reducing the chance of archwire binding or crimping. This dedication to quality and attention to detail is infused into every product that carries the In-Ovation name. Patient Advantages Today more than ever, patients are doing their part to better understand the options available to them. Savvy practices have come to recognize this as an opportunity, enabling you to offer the benefits of self-ligation as an adjunct to your talent, technique and reputation. In providing a self-ligating option, you’ll be able to offer your patients less chair time, fewer appointments and a cleaner, more esthetic appearance. In doing so, you’ll be able to create a perceived (and potentially significant) point of differentiation between your practice and the other competing practices in the area. In-Ovation R Dedication to Detail True Twin Design – Occlusal and gingival twin tie-wings offer an optimal mesial, distal span for achieving superior rotation control. The elimination of the elastomeric ligatures increase your inter-bracket distance. Spring Clip – The self-ligating clip extends fully through the vertical channel in the bracket body, enhancing the structural integrity of the clip. Base Design – The exclusive patented Palmer Notation laser etched into the mesh facilitates bracket management with a ready reference of the quadrant, tooth and prescription.An 80 gauge single mesh, compound contoured base provides a precise anatomical fit. Full Slot Slip Coverage – The In-Ovation R clip provides full coverage across the entire slot for superior rotational control. This allows the clip to interact with the wire both on the mesial and distal, as needed, without the need for auxiliaries. Straight Wire Technology In-Ovation is a completely adjusted true straight wire appliance system that positions teeth at all four dimensions: in/out, angulations, torque, and overcorrection. With this completely adjusted four dimensional appliance system you will need no offset bends in the archwires to obtain an optimal finish in most cases (if the brackets are optimally positioned on teeth). In order to be considered a completely four-dimensional appliance, the bracket must contain: Compound contour base Torque in base Proper in/out and anti-rotation Level slot alignment at the conclusion of appliance therapy Easy Open Clip – The clip opens easily when pressure is applied occlusally to the v-notched clip at the gingival side of the bracket, using the engage R or similar instrument. The clip can be closed with an instrument or simple finger pressure on the incisal curve. Triple Chamfered Slot Walls – Slot walls are beveled outward, facilitating wire engagement and reducing the chance of the archwire binding or crimping. Vertical Scribe Line – A scribe line on the bracket face aids positioning by providing a convenient reference for orienting the center line of the bracket with the facial axis of the clinical crown (FACC). Smooth Swept Tie-Wings –Help to reduce occlusal interference while increasing patient comfort. Adequate undercuts allow easy anchoring for elastic chains or the fastening of color ties at the patient’s request.
http://www.eksenmedikal.com.tr/in-ovation-r-the-original
Copperloy®
Copperloy® Nickel Titanium - The Nimble Copper Wire The Copperloy family is designed to deliver a comfortable and efficient experience. The addition of copper enhances the thermal properties of the wire. UNIQUE PROPERTIES OF COPPERLOY SUPERELASTIC WIRES Scientifically Proven - Precision engineered Copper NiTi allows the wire to express fast, consistent movement. Consistent Performance - Achieve a steady, complete expression of force across all wire sizes for a more precise finishing point. Copper NiTi wires are also more resistant to permanent deformation. Resists Breakage - Controlled load ranges to reduce breakage. Easy Engagement -Due to low hysteresis, the smaller loading forces make wire engagement in the slot easier, even in severe cases. Available in a wide range of sizes, force levels and transformation temperatures. Midline etched and select sizes available with stops.
http://www.eksenmedikal.com.tr/copperloy-nickel-titanium-the-nimble-copper-wire
Saturn™ Bicuspid Bands - Maxillary & Mandibular
Saturn™ bands are Ormco** size compatible. Precision-shaped tooth anatomy for a tight, secure fit with excellent retention. Our distinct right and left anatomy is completely proportioned in all planes and for each band size.Stainless steel that exhibits properties of "hardness" for strength to avoid wall collapse when fitting, yet is malleable enough for "snap" fitting that requires little or no burnishing.Increased buccal height for greater flexibility in the placement and positioning of buccal tubes and lingual attachments.Permanently etched using an Electro Chemical Etching process for easy permanent identification. Interiors are micro-etched to provide a rough ended surface for increased bond strength.24 upper and lower sizes graduated in even, closely spaced increments for improved fit.**G&H® is in no way affiliated with Ormco Corporation
http://www.eksenmedikal.com.tr/saturn-bicuspid-bands-maxillary-mandibular
Intranol CTA
The NiTi memory and force properties of Intranol CTA are excellent for incisor flaring, leveling anterior occlusal cants, molar tip back, correction of minor open bites, Class II molar correction, and finishing.
http://www.eksenmedikal.com.tr/intranol-cta
G&H Stainless Steel - KOBAYASHI TIES
G&H® Koby Ties provide an auxiliary hook which can be added to any bracket just by tying in the archwire. Preformed to be easily tied in place and able to fit most orthodontic brackets. Made from easily adaptable .012 or .014 ligature wire. Available in Short, Long or Tooth-Colored.
http://www.eksenmedikal.com.tr/stainless-steel-kobayashi-ties
G&H Stainless Steel - LIGATURE TIES
Our Short and Long stainless steel ligature ties are prefomed in dead soft temper. Also available in Tooth-Colored.
http://www.eksenmedikal.com.tr/g-h-stainless-steel-ligature-ties
Alpha-Dent® Tray Adhesive
Alpha-Dent® Tray Adhesive is used to obtain the most accurate impressions possible by adhering impression material to the tray. Since impression materials do not have adhesive properties, it is advisable to use Alpha-Dent® Tray Adhesive on all trays before taking an impression.
http://www.eksenmedikal.com.tr/tray-adhesive