Arama Sonuçları..
Toplam 11 kayıt bulundu.
Copperloy®
Copperloy® Nickel Titanium - The Nimble Copper Wire The Copperloy family is designed to deliver a comfortable and efficient experience. The addition of copper enhances the thermal properties of the wire. UNIQUE PROPERTIES OF COPPERLOY SUPERELASTIC WIRES Scientifically Proven - Precision engineered Copper NiTi allows the wire to express fast, consistent movement. Consistent Performance - Achieve a steady, complete expression of force across all wire sizes for a more precise finishing point. Copper NiTi wires are also more resistant to permanent deformation. Resists Breakage - Controlled load ranges to reduce breakage. Easy Engagement -Due to low hysteresis, the smaller loading forces make wire engagement in the slot easier, even in severe cases. Available in a wide range of sizes, force levels and transformation temperatures. Midline etched and select sizes available with stops.
http://www.eksenmedikal.com.tr/copperloy-nickel-titanium-the-nimble-copper-wire
OPAL Crimpable Split Stop Strips
Offering convenient, secure stops that can be placed anywhere along the arch wire, crimpable split stops limit tooth movement and maintain proper wire positioning. Made of 304 annealed stainless steel, split stops crimp easily, yet hold firmly to the arch wire. Ten stops are provided on each strip. Fits round and rectangular sizes up to .021ʺ x .028ʺ.
http://www.eksenmedikal.com.tr/crimpable-split-stop-strips
OPAL Micro Stops
Limiting tooth movement or providing anchorage, Micro Stops slide along the arch wire to the desired position and are crimped with a Weingart, cutter, or crimping instrument. The small size of Micro Stops benefits the patient because of their comfort and esthetics. Available in two sizes, which are selected based on the size of the arch wire. Small Micro Stops fit arch wires up to .018ʺ round or .016ʺ x .016ʺ. Large Micro Stops fit arch wires larger than .018ʺ round or .016ʺ x .016ʺ.
http://www.eksenmedikal.com.tr/micro-stops
NK-121 “V” Bend Stop Plier
Special design for making 1 mm “V” bends to shorten archwires or provide a positive stop. Ideal for placing stops in Nitanium wires. For round or rectangular wires up to .019” x .025”.
http://www.eksenmedikal.com.tr/nk-121-v-bend-stop-plier
G&H 7" MOLAR DISTALIZING OPEN COIL SPRING .010x.045
Molar Distalizing Open Coil Springs deliver gentle 100 grams of force to achieve average 1mm to 1.5mm distalization per month without patient cooperation. Place over archwire and anchor with stop hook and elastics or Nance Appliance for maximum effectiveness. Intermittent closed coil sections allow for end stops when cut to length. .045" I.D.
http://www.eksenmedikal.com.tr/g-h-7-molar-distalizing-open-coil-spring-010x-045
G&H SPRING, MOLAR DIST. 21" SPOOL
Molar Distalizing Open Coil Springs deliver gentle 100 grams of force to achieve average 1mm to 1.5mm distalization per month without patient cooperation. Place over archwire and anchor with stop hook and elastics or Nance Appliance for maximum effectiveness. Intermittent closed coil sections allow for end stops when cut to length. .045" I.D.
http://www.eksenmedikal.com.tr/g-h-spring-molar-dist-21-spool
GAC Stop Wound Open Coil Spring
Sentalloy Stop Wound Open Coil Springs are packaged individually or in three 7” lengths to a tube. Each length is quadruple wound every 4mm. After determining the length of coil needed, simply cut the wire at the center of the tight spiral as indicated below: The quadruple wind can be cut by having one person stretch the wind while another person makes the cut; or by using a separating plier to stretch the wind and a hard wire cutter to make the cut. Sentalloy Stop Wound Open Coils with a standard lumen of .035” are available in forces of 50, 100, 150 and 200 grams. (.045” compatible coils are available in 150 grams of force only.)
http://www.eksenmedikal.com.tr/stop-wound-open-coil-spring
GAC Open Coil Spring
Open, or compression, coils are 15mm in length when passive and may be compressed to 3mm. Between these points, the coil will exert 50 (extra light), 100 (light), 150 (medium), 200 (heavy), or 250 (extra heavy) , and 300 (XX Heavy) grams of force until 14mm, and then the force falls to 0 as it becomes passive again. No distortion will occur during movement. These low forces limit patient discomfort and ensure good circulation in the periodontal pocket during movement. Typically, you will see 4mm of space opened in three months (this varies depending on the age and health of the patient). To engage the open coils, mark the archwire where the mesial and distal tooth destinations are located. Crimp on the mesial stop and ligate the archwire up to the point where the spring is to be placed. Slide the coil over the archwire and crimp on the distal stops. Ligate the balance of the wire. Since the Sentalloy coil needs about 1/10 as much wire as steel, good hygiene is much easier, but do advise the patient to rinse and brush around the coil. No other adjustment is needed.
http://www.eksenmedikal.com.tr/open-coil-spring
GAC Molar Distallization Coils
Maxillary molars can be moved distally in 4-7 months without patient cooperation using our 100 gram Stop Wound Open Coil Springs. A modified Nance or A.C.C.O. may be used as an anchorage device initially. The coils are placed between the 1st bicuspid and the 1st molar – by passing the 2nd bicuspid. The coils are then activated against the molar using an archwire lock or our special crimpable stop. Cut the Stop Wound Open Coils so that they extend to the end of the buccal tube. Ligate the archwire to the 1st bicuspid, set the stop, then slide the coil onto the archwire. Next, feed the archwire into the tube, ensuring that the archwire is fully inserted with 2mm of wire extending beyond the tube. Uprighting springs may be used from the 1st bicuspid to the distal of the laterals to control any anterior movement. Using this system, you will see 1mm per month in space gained, with any anchorage loss well within clinically acceptable limits.
http://www.eksenmedikal.com.tr/gac-molar-distallization-coils
GAC Anterior Retracting Springs
Anterior Retracting Springs are available for segmented retraction of the maxillary four incisors. The increased force in these springs was designed to overcome the resistance of the roots and the rectangular archwire. Stops may be set on the archwire to ensure the proper destination. The eyelets are engaged from our crimped hook or an archwire lock to the molar hook. Expect 1mm of movement per month of activation.
http://www.eksenmedikal.com.tr/gac-anterior-retracting-springs