Arama Sonuçları..
Toplam 120 kayıt bulundu.
678-506 Distal Cinch Back İnstrument
DISTAL CINCH BACK HAND INSTRUMENT Bends archwire distal to the 1st or 2nd molar; maxium wire size .021"x.025" (.53 mm x 64 mm).
http://www.eksenmedikal.com.tr/678-506
G&H Mini 2nd Molar
Mini 2nd Molar Viper™ Low Profile Mini 2nd Tube
http://www.eksenmedikal.com.tr/g-h-mini-2nd-molar
14" Straight Lengths Colboloy
Colboloy™ Blue Nickel Cobalt Wire is an excellent choice for use in archwires, and is superb for use in removable and functional appliances.(25) 14" lengths per tube.
http://www.eksenmedikal.com.tr/14-straight-lengths-colboloy
BT3™ Beta Titanium - Europa™ Form II - Platinum Proportion®
Europa™ Form II @ 92% & 84% Damon* CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.Pack of 25Pack of 10 (Solo-Pack™ option)*G&H is in no way affiliated with or endorsed by Ormco Corp. or Dr. Dwight DamonPlatinum Proportion is a registered service mark owned by Dr. Robert L. Waugh
http://www.eksenmedikal.com.tr/bt3-beta-titanium-europa-form-ii-platinum-proportion
Stainless Steel - Europa™ Form II - Platinum Proportion®
Europa™ Form II @ 92% & 84% Damon* CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.Pack of 25Pack of 10 (Solo-Pack™ option)*G&H is in no way affiliated with or endorsed by Ormco Corp. or Dr. Dwight DamonPlatinum Proportion is a registered service mark owned by Dr. Robert L. Waugh
http://www.eksenmedikal.com.tr/stainless-steel-europa-form-ii-platinum-proportion
Stainless Steel - Ball Post - Bioform III
Bioform III MBT* Tapered / Ideal** CompatibleOur exclusive XR1™ Ball Post archwires offer the comfort and retention of ball ends plus a bendable brass post.A G&H proprietary soldering technique ensures clean, strong and consistent joints. The 16x22 or 19x25 XR1™ stainless base wire is heat treated and stress relieved – increasing the resiliency of the wire to improve mechanics.To select proper size looped arch, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler. Posted Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*MBT is a trademark of 3M Unitek **Ideal is a trademark of Dentsply GAC Intl.
http://www.eksenmedikal.com.tr/stainless-steel-ball-post-bioform-iii
Stainless Steel - Keyhole 2 Loop - Trueform™ I
Trueform™ I Roth / MBT* Square / Tru-Arch** CompatibleLooped archwires offer excellent versatility for a variety of applications including anterior intrusion, space closure, elastic engagement, anterior retraction, etc.Looped archwires are offered in a range of sizes to accommodate most patients upper and lower arches, locating the loops between the lateral and cuspid. Manipulate anterior and posterior segments by activating the loops independently or in unison.To select proper size looped arch, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler. Looped Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of Ormco
http://www.eksenmedikal.com.tr/stainless-steel-keyhole-2-loop-trueform-i
Stainless Steel - Multi Strand - Standard Form
Standard Form 3-Strand is also known as "Twisted" wire.6-Strand is also known as "Coaxial" wire.8-Strand is also known as "Woven" wire.Stranded wires apply a low force level over a given span with minor to moderate deformation depending on the severity of the malocclusion.Round stranded wires are traditionally used in early treatment to correct misaligned teeth. Rectangular stranded wires are typically used in transitional applications to align and detail occlusions effectively with comparatively lower force than solid stainless steel archwires.Pack of 25Pack of 10 (Solo-Pack™ option
http://www.eksenmedikal.com.tr/stainless-steel-multi-strand-standard-form
Stainless Steel - Tooth Colored - Bioform III
Bioform III MBT* Tapered / Ideal** CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.By using only 304v medical grade stainless steel in conjunction with state-of-the-art wire forming equipment, we can ensure you a precise, high-quality stainless steel arch with consistent performance characteristics and integrity.With over 25 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.Pack of 25Pack of 10 (Solo-Pack™ option)*MBT is a trademark of 3M Unitek **Ideal is a trademark of Dentsply GAC Intl.
http://www.eksenmedikal.com.tr/stainless-steel-tooth-colored-bioform-iii
XR1™ Heat-Treated Stainless - Europa™ Form II - Platinum Proportion®
Europa™ Form II @ 92% & 84% Damon* CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, we have crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.
http://www.eksenmedikal.com.tr/xr1-heat-treated-stainless-europa-form-ii-platinum-proportion
XR1™ Heat-Treated Stainless - Bioform I
Bioform I Our XR1™ stainless steel is uniquely heat-treated and stress relieved - increasing the resiliency of the wire for improved mechanics.With over 35 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.We use state-of-the-art forming equipment which ensures product integrity, consistent performance characteristics, and precise archforms.
http://www.eksenmedikal.com.tr/xr1-heat-treated-stainless-bioform-i
M5™ Copper Niti - Europa™ Form II - Platinum Proportion®
Europa™ Form II @ 92% & 84% Damon* CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystallized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.
http://www.eksenmedikal.com.tr/m5-copper-niti-europa-form-ii-platinum-proportion
M5™ Copper Nickel Titanium - Bioform I
Bioform I A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.
http://www.eksenmedikal.com.tr/m5-copper-nickel-titanium-bioform-i
G4™ Nickel Titanium - Europa™ Form II - Platinum Proportion®
Europa™ Form II @ 92% & 84% Damon* CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.
http://www.eksenmedikal.com.tr/g4-nickel-titanium-europa-form-ii-platinum-proportion
G4™ Nickel Titanium - Tooth Colored - Bioform III
Bioform III MBT* Tapered / Ideal** CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.
http://www.eksenmedikal.com.tr/g4-nickel-titanium-tooth-colored-bioform-iii
Sentalloy Round
Used as an initial archwire, the superelastic NiTi wire provides near constant forces during the leveling and aligning stage of treatment. The Sentalloy wire family is designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits.
http://www.eksenmedikal.com.tr/sentalloy-round
Lingual Archwires
DENTPSLY GAC’s lingual archwires are available in Sentalloy, NeoSentalloy and Beta Titanium. These are wires that are recommended to be used with our lingual bracket lines, InOvation L and MTM No•Trace™. Wires are available in .012”, .014”, .016”, .017" x .025" and .016" x .022".
http://www.eksenmedikal.com.tr/lingual-archwires
Colboloy™ Blue Nickel Cobalt - Bioform I
Bioform I Colboloy™ Blue Nickel Cobalt wire, like Elgiloy® wire, is a unique alloy that possesses beneficial performance characteristics. Forgiving by nature to fracture and stress, Colboloy™ Blue allows intricate bending and, if desired, may be heat treated after formation to increase tensile strength and resiliency dramatically (10 minutes at 900°).Excellent for use in archwires, it is also superb for use in removable and functional appliances. Colboloy™ is the preferred wire for many professional laboratory technicians as well as orthodontists practicing Ricketts® and Bioprogressive® techniques.Pack of 25Pack of 10 (Solo-Pack™ option)
http://www.eksenmedikal.com.tr/colboloy-blue-nickel-cobalt-bioform-i
BT3™ Beta Titanium - Trueform™ I - Platinum Proportion®
Trueform™ I @ 92% & 84% Roth / MBT* Square / Tru-Arch** CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.Pack of 25Pack of 10 (Solo-Pack™ option)*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of OrmcoPlatinum Proportion is a registered service mark owned by Dr. Robert L. Waugh
http://www.eksenmedikal.com.tr/bt3-beta-titanium-trueform-i-platinum-proportion
Stainless Steel - Trueform™ I - Platinum Proportion®
Trueform™ I @ 92% & 84% Roth / MBT* Square / Tru-Arch** CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.Pack of 25Pack of 10 (Solo-Pack™ option)*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of OrmcoPlatinum Proportion is a registered service mark owned by Dr. Robert L. Waugh
http://www.eksenmedikal.com.tr/stainless-steel-trueform-i-platinum-proportion
Stainless Steel - Ball Post - Europa™ Form I
Europa™ Form I MBT* Ovoid CompatibleOur exclusive XR1™ Ball Post archwires offer the comfort and retention of ball ends plus a bendable brass post.A G&H proprietary soldering technique ensures clean, strong and consistent joints. The 17x25 or 19x25 XR1™ stainless base wire is heat treated and stress relieved – increasing the resiliency of the wire to improve mechanics.To select proper size looped arch, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler. Posted Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*MBT is trademark of 3M Unitek
http://www.eksenmedikal.com.tr/stainless-steel-ball-post-europa-form-i
Stainless Steel - Keyhole 4 Loop - Trueform™ I
Trueform™ I Roth / MBT* Square / Tru-Arch** CompatibleLooped archwires offer excellent versatility for a variety of applications including anterior intrusion, space closure, elastic engagement, anterior retraction, etc.Looped archwires are offered in a range of sizes to accommodate most patients upper and lower arches, locating the loops between the lateral and cuspid. Manipulate anterior and posterior segments by activating the loops independently or in unison.To select proper size looped arch, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler. Looped Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of Ormco
http://www.eksenmedikal.com.tr/stainless-steel-keyhole-4-loop-trueform-i
Stainless Steel - Multi Strand - Trueform™ I
Trueform™ I Roth / MBT* Square / Tru-Arch** Compatible3-Strand is also known as "Twisted" wire.6-Strand is also known as "Coaxial" wire.8-Strand is also known as "Woven" wire.Stranded wires apply a low force level over a given span with minor to moderate deformation depending on the severity of the malocclusion.Round stranded wires are traditionally used in early treatment to correct misaligned teeth. Rectangular stranded wires are typically used in transitional applications to align and detail occlusions effectively with comparatively lower force than solid stainless steel archwires.Pack of 25Pack of 10 (Solo-Pack™ option)*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of Ormco
http://www.eksenmedikal.com.tr/stainless-steel-multi-strand-trueform-i
Stainless Steel - Tooth Colored - Europa™ Form I
Europa™ Form I MBT* Ovoid CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.By using only 304v medical grade stainless steel in conjunction with state-of-the-art wire forming equipment, we can ensure you a precise, high-quality stainless steel arch with consistent performance characteristics and integrity.With over 25 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.Pack of 25Pack of 10 (Solo-Pack™ option)*MBT is a trademark of 3M Unitek
http://www.eksenmedikal.com.tr/stainless-steel-tooth-colored-europa-form-i
Stainless Steel - Bioform I
Bioform I By using only 304v medical grade stainless steel in conjunction with state-of-the-art wire forming equipment, we can ensure you a precise, high-quality stainless steel arch with consistent performance characteristics and integrity.With over 25 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.
http://www.eksenmedikal.com.tr/bioform-i
XR1™ Heat-Treated Stainless - Trueform™ I - Platinum Proportion®
Trueform™ I @ 92% & 84% Roth / MBT* Square / Tru-Arch** CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, we have crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.
http://www.eksenmedikal.com.tr/xr1-heat-treated-stainless-trueform-i-platinum-proportion
XR1™ Heat-Treated Stainless - Bioform II
Bioform II Our XR1™ stainless steel is uniquely heat-treated and stress relieved - increasing the resiliency of the wire for improved mechanics.With over 35 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.We use state-of-the-art forming equipment which ensures product integrity, consistent performance characteristics, and precise archforms.
http://www.eksenmedikal.com.tr/xr1-heat-treated-stainless-bioform-ii
M5™ Copper Nickel Titanium - Bioform II
Bioform II A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.
http://www.eksenmedikal.com.tr/m5-copper-nickel-titanium-bioform-ii
G4™ Nickel Titanium - Trueform™ I - Platinum Proportion®
Trueform™ I @ 92% & 84% Roth / MBT* Square / Tru-Arch** CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.
http://www.eksenmedikal.com.tr/g4-nickel-titanium-trueform-i-platinum-proportion
G4™ Nickel Titanium - Trueform™ I - Platinum Proportion®
Trueform™ I @ 92% & 84% Roth / MBT* Square / Tru-Arch** CompatibleThese archforms are designed for treatment of patients with smaller tooth anatomy and/or spacing. After measuring all anterior teeth for over five years, Dr. Robert L. Waugh has crystalized a method to consistently deliver a predictable anterior display while idealizing functional coupling of anterior teeth.The Platinum Proportion® Archwire System takes the guess work out of archwire selection based on a simple system of measuring tooth width of the anteriors - cuspid to cuspid. This technique definitively provides the clinician the proper archwire based on the consolidated width.
http://www.eksenmedikal.com.tr/g4-nickel-titanium-trueform-i-platinum-proportion-1
G4™ Nickel Titanium - Tooth Colored - Europa™ Form I
Europa™ Form I MBT* Ovoid CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.
http://www.eksenmedikal.com.tr/g4-nickel-titanium-tooth-colored-europa-form-i
In-Ovation C - Esthetics without Compromise
The In-Ovation C self-ligating bracket is made from ceramic material that compares to the strength and performance of metal. A highly esthetic self-ligating bracket made from a special ceramic material with a rhodium processed clip for enhanced esthetics. The natural color of In-Ovation C makes the bracket a perfect fit for patients concerned about esthetics, while delivering functionality comparable to metal brackets. THE POWER OF INTERACTIVE™ CONTROL FROM START TO FINISH In-Ovation C provides you with the ability to start and effectively finish your treatment in one, simple system. Using the technique of your choice, In-Ovation C enables you to maintain the precise degree of control that you need for each phase of your patient’s treatment. In-Ovation C’s revolutionary Interactive™ technology means you can choose the degree of engagement between the bracket and wire. In-Ovation C can be passive for leveling and aligning, expressive where control is realized and free-sliding is maintained, or active for controlled, optimal finishing. The choice is yours – a benefit not found in “passive only” brackets. INTERACTIVE CONTROL Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment. Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque. Practice Advantages In-Ovation C provides a great way to optimize your practice and expand treatment options. Studies consistently show that self-ligating brackets significantly lower frictional forces; offer faster, easier archwire changes; increase appointment intervals; and shorten patient treatment time. In-Ovation C is easy for doctors and staff to use. Designed for reliable performance, the bracket’s 100% mechanical lock base ensures reliable bonding, debonding and the ability to rebond. A specially designed interactive, Coballoy spring clip provides excellent Patient Advantages Superb esthetics provide the confidence your patients will love Less chairtime during visits Longer intervals between appointments Excellent results Improved oral hygiene The Art of Orthodontic Excellence Transluscent Ceramic Construction In-Ovation C brackets are manufactured from a high-tech ceramic that combines excellent translucency with strength and performance similar to that of steel. Reliable Mechanical Bonding In-Ovation C employs a proprietary process to form strong, undercut bonding nubs on the bottom of the bracket base. These provide excellent anchoring points for the adhesive, resulting in a bond that is 100% mechanical and debonds easily after treatment. Straight Wire Technology A true straight wire appliance is one in which all the brackets have been designed to guide teeth into their desired positions with a preformed wire. In-Ovation is a true straight wire appliance that features: Compound Contour Base Torque in the Base Programmed In-Out Control Level Slot Alignment True Twin Design Occlusal and gingival twin tie wings offer an optimal mesial, distal span for achieving superior rotation control. The elimination of the elastomeric ligatures increases your inter-bracket distance. Spring Clip The self-ligating clip extends fully through a vertical channel in the bracket body, enhancing the structural integrity of the clip. A unique rhodium treatment process provides a low-sheen surface for reduced visibility and enhanced aesthetics. Easy Opening and Closing The clip opens easily when pressure is applied occlusally to the gingival sphere using the Engage-C. This is the primary method for opening and closing the clip is the gingival sphere. If unable to access the gingival sphere you can also utilize the Opin notch on the facial surface of the clip applying gentle pressure occulsally with amini scaler. The clip can be closed with aninstrument or simple finger pressure on the incisal curve. Triple Chamfered Slot Walls Slot walls are beveled outward, facilitating wire engagement and reducing the chance of the archwire binding or crimping. Disto–Gingival Dimple A color-code on the disto-gingival tie wing provides immediate identification of the tooth for which the bracket is intended. A matching colored removable site gauge is also in the slot for position orientation. Smooth Swept Tie Wings Smooth, swept tie wings help to reduce occlusal interference while increasing patient comfort. Adequate undercuts allow easy anchoring for elastic chains or the fastening of color ties at the patient’s request.
http://www.eksenmedikal.com.tr/in-ovation-c-esthetics-without-compromise
GAC Elation™ MB
The The Elation™ MB design is a durable, high-quality mechanical base. This innovative mechanical base has been thoroughly tested and proven reliably effective in both bonding and de-bonding procedures. In addition, this design improvement will eliminate the need for a plastic primer. Our newest insert flows around the wire, which is designed to lower friction, as the wire touches the insert only at four small points at the polymeric wall. Next, Elation™ MB’s steel translates the torque through the base without the usual distortion or give of plastic and other polymeric materials. Unlike inserts which only line the slot wall, Elation™ MB’s unique slot is placed within the body to strengthen the whole bracket, not just the slot. This placement also makes the steel insert harder to see, creating a more aesthetic appearance. Elation™ MB works effectively with our NeoBond® adhesive; however, you can expect the same level of effectiveness from any light cure or chemical cure DENTSPLY GAC adhesive. Elation™ MB can be utilized with any archwire. But for a total esthetic solution appliance, we recommend GAC High Aesthetic Wires. Stregnth and Beauty Durable Design -Polymeric strength resists discoloration and erosion\ Color code ID for easy bracket identification Nearly invisible steel insert Tested and proven mechanical lock base
http://www.eksenmedikal.com.tr/elation-mb
NeoSentalloy - Square or Rectangluar
Intermediate archwire with body heat activation and true superelasticity with near constant forces. Also available with IONGUARD. Neo-Sentalloy is part of the Sentalloy wire family sharing the same properties designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation - At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity - Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect - Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits. IONGUARD - IONGUARD is not a coating; it is a fundamental change in the wire’s surface. Without changing the wire’s dimensions, or altering any of the wire’s unique superelastic properties, the process produces sliding mechanics comparable to stainless steel, while sealing the occlusal surface to reduce nickel leaching and breakage.
http://www.eksenmedikal.com.tr/neosentalloy-square-or-rectangluar
High Esthetic Archwires
According to a recent patient survey by the American Journal of Orthodontics and Dentofacial Orthopedics, ceramic appliances with clear or white wires are rated consistently higher over their metal counterparts in terms of esthetics. This is a dierence patients are willing to pay several hundred dollars for. Crafted by a unique rhodium process, our High Esthetic archwires have a low-reflectivity surface for a soft, frosted appearance delivering the same outstanding properties and performance as their standard counterparts.
http://www.eksenmedikal.com.tr/high-esthetic-archwires
Colboloy™ Blue Nickel Cobalt - Bioform III
Bioform III MBT* Tapered / Ideal** CompatibleColboloy™ Blue Nickel Cobalt wire, like Elgiloy® wire, is a unique alloy that possesses beneficial performance characteristics. Forgiving by nature to fracture and stress, Colboloy™ Blue allows intricate bending and, if desired, may be heat treated after formation to increase tensile strength and resiliency dramatically (10 minutes at 900°).Excellent for use in archwires, it is also superb for use in removable and functional appliances. Colboloy™ is the preferred wire for many professional laboratory technicians as well as orthodontists practicing Ricketts® and Bioprogressive® techniques.Pack of 25Pack of 10 (Solo-Pack™ option)*MBT is a trademark of 3M Unitek **Ideal is a trademark of Dentsply GAC Intl.
http://www.eksenmedikal.com.tr/colboloy-blue-nickel-cobalt-bioform-iii
Stainless Steel - Ball Post - Europa™ Form II
Europa™ Form II Damon* CompatibleOur exclusive XR1™ Ball Post archwires offer the comfort and retention of ball ends plus a bendable brass post.A G&H proprietary soldering technique ensures clean, strong and consistent joints. The 16x25 or 19x25 XR1™ stainless base wire is heat treated and stress relieved – increasing the resiliency of the wire to improve mechanics.To select proper size looped arch, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler. Posted Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*G&H is in no way affiliated with or endorsed by Ormco Corp. or Dr. Dwight Damon
http://www.eksenmedikal.com.tr/stainless-steel-ball-post-europa-form-ii
Stainless Steel - T-Loop - Trueform™ I
Trueform™ I Roth / MBT* Square / Tru-Arch** CompatibleLooped archwires offer excellent versatility for a variety of applications including anterior intrusion, space closure, elastic engagement, anterior retraction, etc.Looped archwires are offered in a range of sizes to accommodate most patients upper and lower arches, locating the loops between the lateral and cuspid. Manipulate anterior and posterior segments by activating the loops independently or in unison.To select proper size looped arch, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler. Looped Archwire Kit of 100 wires size distribution MM Sizing 24 26 28 30 32 34 36 38 40 42 44 46 Quantity 5 10 10 10 5 5 10 10 10 10 10 5 Pack of 10*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of Ormco
http://www.eksenmedikal.com.tr/stainless-steel-t-loop-trueform-i
Stainless Steel - Tooth Colored - Europa™ Form II
Europa™ Form II Damon* CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.By using only 304v medical grade stainless steel in conjunction with state-of-the-art wire forming equipment, we can ensure you a precise, high-quality stainless steel arch with consistent performance characteristics and integrity.With over 25 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.Pack of 25Pack of 10 (Solo-Pack™ option)*G&H is in no way affiliated with or endorsed by Ormco Corp. or Dr. Dwight Damon
http://www.eksenmedikal.com.tr/stainless-steel-tooth-colored-europa-form-ii
Stainless Steel - Bioform II
Bioform II By using only 304v medical grade stainless steel in conjunction with state-of-the-art wire forming equipment, we can ensure you a precise, high-quality stainless steel arch with consistent performance characteristics and integrity.With over 25 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.
http://www.eksenmedikal.com.tr/stainless-steel-bioform-ii
XR1™ Heat-Treated Stainless - Bioform III
Bioform III MBT* Tapered / Ideal** CompatibleOur XR1™ stainless steel is uniquely heat-treated and stress relieved - increasing the resiliency of the wire for improved mechanics.With over 35 years of wire forming experience, we understand the intricacies and nature of archwire production and take great pride in quality craftsmanship.We use state-of-the-art forming equipment which ensures product integrity, consistent performance characteristics, and precise archforms.
http://www.eksenmedikal.com.tr/xr1-heat-treated-stainless-bioform-iii
M5™ Copper Nickel Titanium - Bioform III
Bioform III MBT* Tapered / Ideal** CompatibleA premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.
http://www.eksenmedikal.com.tr/m5-copper-nickel-titanium-bioform-iii
G4™ Nickel Titanium - Tooth Colored - Europa™ Form II
Europa™ Form II Damon* CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.
http://www.eksenmedikal.com.tr/g4-nickel-titanium-tooth-colored-europa-form-ii
In-Ovation® mini - Small Imprint, Big Impact
The In-Ovation® mini bracket is the smallest self-ligating twin bracket we’ve ever produced. Designed, developed and manufactured using the latest in micro-engineering technology, In-Ovation mini raises the bar on low-profile performance. From the innovative clip design to the patented Interactive™ technology that offers unmatched precision and control—In-Ovation® mini gives you the power to finish every case with the utmost precision. And with a smaller than other competitive interactive brackets your patients will love the esthetics and comfort level. Innovation means doing more with less, and no bracket does more for you, your practice, and your patients, than the In-Ovation mini. It’s the bracket you’ve always wanted, from the company you’ve always trusted. Programmed for Versatility In-Ovation® mini is proud to offer you the versatility of both interactive and passive design in a single unified system. It puts unprecedented treatment options in your hands. Passive cuspids and bicuspids are available in the posterior for lower friction sliding mechanics. INTERACTIVE CONTROL Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment. Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque. Design Features Interactive Spring Clip Presents the utmost in control throughout treatment. True Twin Design Four tie-wings with adequate undercuts and integrated body channel allow easy anchoring of elastic chains or use of color ties at the patient’s request. Base Design An 80 gauge single mesh, compound contoured base provides a precise anatomical fit. Exclusive Patented Standard Palmer Notation laser etched into the mesh facilitates bracket management with a ready reference of the quadrant, tooth and prescription. Full Slot Clip Coverage For rotational control that limits the need for auxiliaries. Facial Scribe Line Added to the In-Ovation mini for simplified placement. True Straight Wire Design A true straight wire appliance is one in which all the brackets have been designed to guide the teeth into their ideal position with a preformed wire. In-Ovation® mini is a true straight wire appliance that features a compound contour base, torque in the base, programmed in-out control and level slot alignment. Easy Open Clip Affords a frustration-free procedure. Disto-Gingival Dimple A color code on the disto-gingival tie-wing provides immediate identification of the tooth for which the bracket was designed. Triple Chamfered Slot Walls Ease of engagement, reducing the chance of the archwire binding or crimping. Smooth Swept Tie Wings Helps reduce occlusal interference while increasing patient comfort.
http://www.eksenmedikal.com.tr/in-ovation-mini-small-imprint-big-impact
BioForce
BioForce - Square or Rectangluar Optimally biological forces begin at approximately 80 grams of force at the anteriors, and gradually increase to approximately 300 grams of force in the molars. Also available with IONGUARD. Optimal Tooth Movement and Ideal Biological Forces As this chart shows, the optimal force needed to move anteriors is not the same as the optimal force needed to move molars. If a force is designed to move anteriors, it is too light to move molars. If a force is great enough to move molars, the force is too strong - traumatically strong - for anteriors. Other wires offer one force at a time, requiring at least two or three wire changes to achieve the desired movement. BioForce exhibits low forces at the anterior, gradually increases force in the bicuspids, and again in the molars. Each tooth receives the optimal biological force necessary to move specific teeth in one wire. Anterior Region of arch form has the lowest heat-activated force, as anterior teeth have the lightest roots. The Bicuspid Region of the arch maintains a slightly greater heat-activated force to move larger rooted bicuspids. The Posterior Region of the arch form has the greatest heat-activated force within the archwire for moving thestrong-rooted molars. BioForce also shares the properties of all Sentalloy wires and is designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits. IONGUARD - IONGUARD is not a coating; it is a fundamental change in the wire’s surface. Without changing the wire’s dimensions, or altering any of the wire’s unique superelastic properties, the process produces sliding mechanics comparable to stainless steel, while sealing the occlusal surface to reduce nickel leaching and breakage.
http://www.eksenmedikal.com.tr/bioforce-square-or-rectangluar
Double Key Hole Loop - Retraction Wire
DENTSPLY GAC's Double Keyhole Loop stainless steel archwires are used to gently close spaces with the ideal stiness to maintain arch form. This wire is available in two millimeter increments from 22mm to 44mm, with two or four keyhole loops, as well as a kit containing 75 assorted sizes.
http://www.eksenmedikal.com.tr/double-key-hole-loop-retraction-wire
Colboloy™ Blue Nickel Cobalt - Bioform V
Bioform V Colboloy™ Blue Nickel Cobalt wire, like Elgiloy® wire, is a unique alloy that possesses beneficial performance characteristics. Forgiving by nature to fracture and stress, Colboloy™ Blue allows intricate bending and, if desired, may be heat treated after formation to increase tensile strength and resiliency dramatically (10 minutes at 900°).Excellent for use in archwires, it is also superb for use in removable and functional appliances. Colboloy™ is the preferred wire for many professional laboratory technicians as well as orthodontists practicing Ricketts® and Bioprogressive® techniques.Pack of 25Pack of 10 (Solo-Pack™ option)
http://www.eksenmedikal.com.tr/colboloy-blue-nickel-cobalt-bioform-v
Stainless Steel - Ball Post - Trueform™ I
Trueform™ I Roth / MBT* Square / Tru-Arch** CompatibleOur exclusive XR1™ Ball Post archwires offer the comfort and retention of ball ends plus a bendable brass post.A G&H proprietary soldering technique ensures clean, strong and consistent joints. The 16x22 or 19x25 XR1™ stainless base wire is heat treated and stress relieved – increasing the resiliency of the wire to improve mechanics.To select proper size looped arch, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler. Posted Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of Ormco
http://www.eksenmedikal.com.tr/stainless-steel-ball-post-trueform-i