OPAL Nickel Titanium Closed-Coil Springs

Nickel Titanium Closed-Coil Springs

Opalastic™ Colored Chain

Opalastic colored chain is made from medical grade polyurethane, which is latex free and hypoallergenic. Available in three sizes, Opalastic colored chain provides a consistent force over time due to its superior elasticity.Available in a variety of colors and packaged in 15' spools, Opalastic chain is the perfect complement to colored ligatures, allowing your patients the opportunity to show their true colors.Opalastic chain has an inner diameter of 0.048".      

Stainless Steel - Multi Strand - Standard Form

Standard Form 3-Strand is also known as "Twisted" wire.6-Strand is also known as "Coaxial" wire.8-Strand is also known as "Woven" wire.Stranded wires apply a low force level over a given span with minor to moderate deformation depending on the severity of the malocclusion.Round stranded wires are traditionally used in early treatment to correct misaligned teeth. Rectangular stranded wires are typically used in transitional applications to align and detail occlusions effectively with comparatively lower force than solid stainless steel archwires.Pack of 25Pack of 10 (Solo-Pack™ option

M5™ Copper Nickel Titanium - Bioform I

Bioform I A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Tooth Colored - Bioform III

Bioform III MBT* Tapered / Ideal** CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G4™ Nickel Titanium - Bioform I

  Bioform I G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

Sentalloy Round

  Used as an initial archwire, the superelastic NiTi wire provides near constant forces during the leveling and aligning stage of treatment. The Sentalloy wire family is designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits.

NK-304 Force Modular Separator

678-210 Seperating Pliers

FORCE MODULE SEPARATING PLIERS     Used for placement of elastic separators.

Stainless Steel - Multi Strand - Trueform™ I

Trueform™ I Roth / MBT* Square / Tru-Arch** Compatible3-Strand is also known as "Twisted" wire.6-Strand is also known as "Coaxial" wire.8-Strand is also known as "Woven" wire.Stranded wires apply a low force level over a given span with minor to moderate deformation depending on the severity of the malocclusion.Round stranded wires are traditionally used in early treatment to correct misaligned teeth. Rectangular stranded wires are typically used in transitional applications to align and detail occlusions effectively with comparatively lower force than solid stainless steel archwires.Pack of 25Pack of 10 (Solo-Pack™ option)*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of Ormco  

M5™ Copper Nickel Titanium - Bioform II

Bioform II A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Tooth Colored - Europa™ Form I

Europa™ Form I MBT* Ovoid CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G4™ Nickel Titanium - Bioform II

  Bioform II G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G&H PowerLinx™ Polymer Chain

  A new biomaterial breakthrough in elastic chain!   Our PowerLinx™ chain is manufactured from a thermoset polymer material which is superior to the traditional polyurethane or plastic chain. Has a more "rubber-like" consistency which provides advanced elasticity and rebound.   Studies prove the recovery force of PowerLinx™ chain remains elevated and active over a longer time-frame.   Engagement Time PowerLinx™ Plastic/Polyurethane 24 hrs. 95% 70% 48 hrs. 91% 64% 6 weeks 85% 20%   Each spool contains 2 meters (6.56 ft.)

In-Ovation C - Esthetics without Compromise

The In-Ovation C self-ligating bracket is made from ceramic material that compares to the strength and performance of metal.  A highly esthetic self-ligating bracket made from a special ceramic material with a rhodium processed clip for enhanced esthetics. The natural color of In-Ovation C makes the bracket a perfect fit for patients concerned about esthetics, while delivering functionality comparable to metal brackets.   THE POWER OF INTERACTIVE™ CONTROL FROM START TO FINISH In-Ovation C provides you with the ability to start and effectively finish your treatment in one, simple system. Using the technique of your choice, In-Ovation C enables you to maintain the precise degree of control that you need for each phase of your patient’s treatment. In-Ovation C’s revolutionary Interactive™ technology means you can choose the degree of engagement between the bracket and wire. In-Ovation C can be passive for leveling and aligning, expressive where control is realized and free-sliding is maintained, or active for controlled, optimal finishing. The choice is yours – a benefit not found in “passive only” brackets. INTERACTIVE CONTROL Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment. Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque.   Practice Advantages In-Ovation C provides a great way to optimize your practice and expand treatment options. Studies consistently show that self-ligating brackets significantly lower frictional forces; offer faster, easier archwire changes; increase appointment intervals; and shorten patient treatment time. In-Ovation C is easy for doctors and staff to use. Designed for reliable performance, the bracket’s 100% mechanical lock base ensures reliable bonding, debonding and the ability to rebond. A specially designed interactive, Coballoy spring clip provides excellent    Patient Advantages Superb esthetics provide the confidence your patients will love Less chairtime during visits Longer intervals between appointments Excellent results Improved oral hygiene   The Art of Orthodontic Excellence Transluscent Ceramic Construction In-Ovation C brackets are manufactured from a high-tech ceramic that combines excellent translucency with strength and performance similar to that of steel. Reliable Mechanical Bonding In-Ovation C employs a proprietary process to form strong, undercut bonding nubs on the bottom of the bracket base. These provide excellent anchoring points for the adhesive, resulting in a bond that is 100% mechanical and debonds easily after treatment. Straight Wire Technology A true straight wire appliance is one in which all the brackets have been designed to guide teeth into their desired positions with a preformed wire. In-Ovation is a true straight wire appliance that features: Compound Contour Base Torque in the Base Programmed In-Out Control Level Slot Alignment True Twin Design Occlusal and gingival twin tie wings offer an optimal mesial, distal span for achieving superior rotation control. The elimination of the elastomeric ligatures increases your inter-bracket distance. Spring Clip The self-ligating clip extends fully through a vertical channel in the bracket body, enhancing the structural integrity of the clip. A unique rhodium treatment process provides a low-sheen surface for reduced visibility and enhanced aesthetics.   Easy Opening and Closing The clip opens easily when pressure is applied occlusally to the gingival sphere using the Engage-C.  This is the primary method for opening and closing the clip is the gingival sphere. If unable to access the gingival sphere you can also utilize the Opin notch on the facial surface of the clip applying gentle pressure occulsally with amini scaler. The clip can be closed with aninstrument or simple finger pressure  on the incisal curve.   Triple Chamfered Slot Walls Slot walls are beveled outward, facilitating wire engagement and reducing the chance of the archwire binding or crimping. Disto–Gingival Dimple A color-code on the disto-gingival tie wing provides immediate identification of the tooth for which the bracket is intended. A matching colored removable site gauge is also in the slot for position orientation. Smooth Swept Tie Wings Smooth, swept tie wings help to reduce occlusal interference while increasing patient comfort. Adequate undercuts allow easy anchoring for elastic chains or the fastening of color ties at the patient’s request.    

NeoSentalloy - Square or Rectangluar

Intermediate archwire with body heat activation and true superelasticity with near constant forces. Also available with IONGUARD. Neo-Sentalloy is part of the Sentalloy wire family sharing the same properties designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation - At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity - Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect - Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits. IONGUARD - IONGUARD is not a coating; it is a fundamental change in the wire’s surface. Without changing the wire’s dimensions, or altering any of the wire’s unique superelastic properties, the process produces sliding mechanics comparable to stainless steel, while sealing the occlusal surface to reduce nickel leaching and breakage.  

M5™ Copper Nickel Titanium - Bioform III

Bioform III MBT* Tapered / Ideal** CompatibleA premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Tooth Colored - Europa™ Form II

Europa™ Form II Damon* CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G4™ Nickel Titanium - Bioform III

Bioform III MBT* Tapered / Ideal** CompatibleG4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

BioForce

BioForce - Square or Rectangluar   Optimally biological forces begin at approximately 80 grams of force at the anteriors, and gradually increase to approximately 300 grams of force in the molars. Also available with IONGUARD. Optimal Tooth Movement and Ideal Biological Forces As this chart shows, the optimal force needed to move anteriors is not the same as the optimal force needed to move molars. If a force is designed to move anteriors, it is too light to move molars. If a force is great enough to move molars, the force is too strong - traumatically strong - for anteriors. Other wires offer one force at a time, requiring at least two or three wire changes to achieve the desired movement. BioForce exhibits low forces at the anterior, gradually increases force in the bicuspids, and again in the molars. Each tooth receives the optimal biological force necessary to move specific teeth in one wire. Anterior Region of arch form has the lowest heat-activated force, as anterior teeth have the lightest roots. The Bicuspid Region of the arch maintains a slightly greater heat-activated force to move larger rooted bicuspids. The Posterior Region of the arch form has the greatest heat-activated force within the archwire for moving thestrong-rooted molars. BioForce also shares the properties of all Sentalloy wires and is designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits. IONGUARD - IONGUARD is not a coating; it is a fundamental change in the wire’s surface. Without changing the wire’s dimensions, or altering any of the wire’s unique superelastic properties, the process produces sliding mechanics comparable to stainless steel, while sealing the occlusal surface to reduce nickel leaching and breakage.

CAPlant & SMS

Diversity - Optimized in mid-palate- Diverse functions in the buccal- 3-way slot for various wiring- 3-D teeth movement and multi-anchor effect with a single mini-implantSimplicity & Stability- Easy insertion and removal of wires- Rigid wire-anchor fastening by cap and tapered slot fixture headHygiene & Comfort- NO-RESIN fastening- Minimizes contamination and foreign body sensation   SMS High force loadingEasy wire engaging and elastomerSliding mechanics applicable         

M5™ Copper Nickel Titanium - Bioform IV

Bioform IV A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Tooth Colored - Reverse Curve I

Reverse Curve I Original with moderate curve, torque and distal toe-in.Tooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G4™ Nickel Titanium - Bioform III - G4orce™

Bioform III MBT* Tapered / Ideal** CompatibleG4orce™ is a G4™ Nickel Titanium wire with 3 distinct zones offering progressive forces that increase from anterior to posterior. Light anterior force (100g), medium cuspid/bicuspid force (200g), and a heavy molar force (300g) when applied to a 19x25 wire.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

Copperloy®

Copperloy® Nickel Titanium - The Nimble Copper Wire   The Copperloy family is designed to deliver a comfortable and efficient experience. The addition of copper enhances the thermal properties of the wire.  UNIQUE PROPERTIES OF COPPERLOY SUPERELASTIC WIRES Scientifically Proven - Precision engineered Copper NiTi allows the wire to express fast, consistent movement. Consistent Performance - Achieve a steady, complete expression of force across all wire sizes for a more precise finishing point. Copper NiTi wires are also more resistant to permanent deformation. Resists Breakage - Controlled load ranges to reduce breakage. Easy Engagement -Due to low hysteresis, the smaller loading forces make wire engagement in the slot easier, even in severe cases. Available in a wide range of sizes, force levels and transformation temperatures. Midline etched and select sizes available with stops.

Stainless Steel - Straight Post - Europa™ Form I

Europa™ Form I MBT* Ovoid CompatibleOur Posted Archwires facilitate retraction, Class II engagement, and segmented force application as desired.We hand processes each stainless archwire with .030" silver soldered brass posts. Sized in 2mm increments, upper archwires are available in 34 to 44 mm sizes, lower in 22 to 32mm. Posted Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*MBT is trademark of 3M Unitek

M5™ Copper Nickel Titanium - Bioform V

  Bioform V A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Tooth Colored - Trueform™ I

Trueform™ I Roth / MBT* Square / Tru-Arch** CompatibleTooth-Colored, epoxy coated archwires necessitate the use of base wires that are .002" smaller than the final coated dimensions, so please consider this when selecting wires to ensure performance will be compatible with treatment objectives.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

G4™ Nickel Titanium - Bioform IV

Bioform IV G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

Accu-Force™ and Accu-Force™ G3 - An Economic NiTi Wire Option

  These advanced superelastic and heat-activated archwires are available in round, square, and rectangular for all stages of treatment. Superelastic provides gentle, nearly constant forces. Shape memory effect provides an overwhelming desire to return to original shape. Heat activated are soft and pliable, easy to engage at room temperature, may be chilled for easier ligation. Optimal tooth movement and ideal biological forces in Accu-Force™ G3 wires. Accu-Force™ round is used as an initial archwire. The superelastic  NiTi wire provides near constant  forces during the leveling and  aligning stage of treatment. Accu-Force™ G3 - Sqaure or Rectangular is an advanced superelastic archwire for early to mid treatment. Accu-Force™ G3 starts with low, gentle forces for the anteriors, and increases force in the posterior, where it plateaus in the molar region, all in the same wire.

Stainless Steel - Straight Post - Europa™ Form II

Europa™ Form II Damon* CompatibleOur Posted Archwires facilitate retraction, Class II engagement, and segmented force application as desired.We hand processes each stainless archwire with .030" silver soldered brass posts. Sized in 2mm increments, upper archwires are available in 34 to 44 mm sizes, lower in 22 to 32mm. Posted Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*G&H is in no way affiliated with or endorsed by Ormco Corp. or Dr. Dwight Damon

M5™ Copper Nickel Titanium - Europa™ Form I

Europa™ Form I MBT* Ovoid CompatibleA premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Bioform V

Bioform V G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

Rotation Wedges, Clear&Gray, Pack of 100

Rotation wedges fit beneath the archwire to administer rotation forces where desired.100 wedges per pack.Latex Free

Lowland NiTi

Lowland NiTi archwire features gentle, continuous forces for eˆcient tooth movement. Available in a wide selection of arch forms, these bendable NiTi wires provide an economical solution for a variety of application.

Stainless Steel - Straight Post - Trueform™ I

Trueform™ I Roth / MBT* Square / Tru-Arch** CompatibleOur Posted Archwires facilitate retraction, Class II engagement, and segmented force application as desired.We hand processes each stainless archwire with .030" silver soldered brass posts. Sized in 2mm increments, upper archwires are available in 34 to 44 mm sizes, lower in 22 to 32mm. Posted Archwire Kit of 100 wires size distribution MM Sizing 22 24 26 28 30 32 34 36 38 40 42 44 Quantity 5 5 10 10 10 5 10 10 10 10 10 5 Pack of 10*MBT is a trademark of 3M Unitek **Tru-Arch is a trademark of Ormco

M5™ Copper Nickel Titanium - Europa™ Form II

  Europa™ Form II Damon* CompatibleA premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Europa™ Form I

Europa™ Form I MBT* Ovoid CompatibleG4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

Intranol CTA

The NiTi memory and force properties of Intranol CTA are excellent for incisor flaring, leveling anterior occlusal cants, molar tip back, correction of minor open bites, Class II molar correction, and finishing.

M5™ Copper Nickel Titanium - Preformed Lingual

Preformed Lingual These archforms were developed to meet the challenging mechanics of modern lingual treatment - designed and adapted precisely to lingual anatomy. Three anterior sizes in both upper and lower ensure a proper fit.A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Europa™ Form II

Europa™ Form II Damon* CompatibleG4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

M5™ Copper Nickel Titanium - Reverse Curve I

Reverse Curve I Original with moderate curve, torque and distal toe-in.A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.Reverse Curve archwires provide excellent counter forces to achieve bite modifications quickly and efficiently, while also improving archform integrity.

G4™ Nickel Titanium - Reverse Curve - Europa™ Form II

Europa™ Form II Reverse Curve Damon* CompatibleReverse Curve archwires provide excellent counter forces to achieve bite modifications quickly and efficiently, while also improving archform integrity.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

M5™ Copper Nickel Titanium - Reverse Curve III

Reverse Curve III Straight Leg, identical to our Trueform™ I shape with moderate curve and no distal toe-in or posterior torque.A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.Reverse Curve archwires provide excellent counter forces to achieve bite modifications quickly and efficiently, while also improving archform integrity.

G4™ Nickel Titanium - Pre Torqued - Europa™ Form II

Europa™ Form II Damon* CompatibleEffective on both upper and lower arches, our 20° pre-torqued nickel titanium wires provide early and continuous translation of torque forces to anteriors that can be applied labially or lingually, simply by reversing the orientation of the wire.Available in 3 mm span sizes. Typically, a 28mm span is applied to the lower arch, 34mm & 38mm for the upper. To select proper mm span, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

M5™ Copper Nickel Titanium - Standard Form

Standard Form A premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Pre Torqued - RC - Europa™ Form II

Europa™ Form II Reverse Curve Damon* CompatibleEffective on both upper and lower arches, our 20° pre-torqued nickel titanium wires provide early and continuous translation of torque forces to anteriors that can be applied labially or lingually, simply by reversing the orientation of the wire.Available in 3 mm span sizes. Typically, a 28mm span is applied to the lower arch, 34mm & 38mm for the upper. To select proper mm span, measure along incisal edge from distal of lateral to distal of opposite lateral with a mm ruler.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

M5™ Copper Nickel Titanium - Trueform™ I

Trueform™ I Roth / MBT* Square / Tru-Arch** CompatibleA premium nickel titanium wire that incorporates a precise temperature transformation at 27°C for predictable tooth moving forces. G&H quality manufacturing and testing processes make M5™ Copper Nickel Titanium distinct from all other archwires used in orthodontics.Many orthodontists induce the martensitic phase by chilling the wire below its transition temperature prior to placement. Following engagement, as the thermal wire elevates in temperature within the oral cavity, the transition from martensitic to austenitic phases causes the force level to increase and the shape memory phenomenon to occur.

G4™ Nickel Titanium - Preformed Lingual

Preformed Lingual These archforms were developed to meet the challenging mechanics of modern lingual treatment - designed and adapted precisely to lingual anatomy. Three anterior sizes in both upper and lower ensure a proper fit.G4™ Nickel Titanium is an uniquely enhanced alloy that has been exclusively formulated to yield consistent and specific force, memory, and elasticity values.The clinically significant characteristics of G4™ Nickel Titanium include lower initial load forces, for patient comfort, and increased residual forces as full shape recovery progresses. Teeth move farther and faster.

AUTOCLAVABLE CHEEK/TONGUE RETRACTOR 2PK

Designed to maximize intra-oral exposure for any treatment procedure.Lips and cheeks are retracted simultaneously while the tongue is blocked. Soft material and gentle force insures patient comfort. 2/pack.Autoclavable (127°C - 260°F Maximum Temperature)